SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “B3”/ -OLD- 6 inch lift install TTB supermotors.net/registry/25989/85998

Album section

-OLD- 6 inch lift install TTB

From 1996 Ford Bronco “B3”, documented by Kingfish999.

9 photos
← Back to this vehicle
1996 Ford Bronco - have the axle completely removed from the truck 1996 Ford Bronco - while this is not part of the lift, i did this during the lift while the axle beams were out. I regeared the front axle from 3.55 stock to… 1996 Ford Bronco - got the old brackets removed. installed the 6 inch beam drop brackets installed and the axle beams hung with new Energy Suspension poly bus… 1996 Ford Bronco - installed the extended radius arm 1996 Ford Bronco - installed the 5.5 inch Deaver coil springs. got the 6 inch BDS Suspension shocks installed. have the radius arm brackets relocated and moun… 1996 Ford Bronco - did same on driver side 1996 Ford Bronco - while this is not part of the actual lift, i did this during the lift. this axle was originally an oddball 3.73 gear ratio. with an open di… 1996 Ford Bronco - i swapped these F250 leaf springs in a long time ago but they are part of the lift. they add around 3 inches of lift over stock leaf spring… 1996 Ford Bronco - got the suspension mostly done. now time to install the engine. needed to raise truck jsut enough for the hoists legs to go under but low e…