SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1987-1991/ 1991 Bronco/ Thermostat Housing supermotors.net/registry/26068/82388

Album section

Thermostat Housing

From 1991 Ford Bronco, documented by backyardsigns.

12 photos
← Back to this vehicle
1991 Ford Bronco - I am having trouble finding a thermostat housing that will work so I will build one. I am starting with a piece of 3"x4"x 3/8" angle and so… 1991 Ford Bronco - I turned the last 2" down to 1.75' O.D. and left a 1.8" O.D. piece on the end like the factory pieces have. I lost the picture of boring ou… 1991 Ford Bronco - Here is the angle I have to cut for clearance..... at first I thought that was all I would need but I had to change that. 1991 Ford Bronco - Here are the pieces ready for welding 1991 Ford Bronco - My thermostat housing version 1 welded and ready for bead blasting and paint. 1991 Ford Bronco - So to make it work I had to add a 30* bend just above the flange while rotating it a little off that cuts center. 1991 Ford Bronco - Here is the final product after welding. 1991 Ford Bronco - Here is a slightly different view after bead blasting ready for trial fit and then paint..... You can see the mounting holes that are count… 1991 Ford Bronco - Here is the final product painted and thermostat and gasket installed. 1991 Ford Bronco - Another view from just above the radiator side connection. 1991 Ford Bronco - This is how close the HEI distributor is and the main reason for the socket cap screws. 1991 Ford Bronco - And just a overall pic of the finished product.