SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ F-250/ 1987-1991/ “Creampuff”/ Work supermotors.net/registry/26713/83639

Album section

Work

From 1990 Ford F-250 “Creampuff”, documented by Kingfish999.

23 photos
← Back to this vehicle
1990 Ford F-250 - installed new and actually functioning cab marker lights with LED bulbs. truck originally didnt have the lights and somebody decided to add… 1990 Ford F-250 - Pulled the intake manifold to swap it to the earlier GT40 intake. the 98 Intake uses external EGR with a tube running to the exhaust and us… 1990 Ford F-250 - Pulled the intake manifold to swap it to the earlier GT40 intake. the 98 Intake uses external EGR with a tube running to the exhaust and us… 1990 Ford F-250 - pulled the heads and timing cover. the GT40P heads that came with the engine are good heads but the valvesprings are known issues. also the… 1990 Ford F-250 - old tranny got burned up and was permanently stuck in 2nd gear. in neutral and park it was still in gear and in reverse it cancel out each… 1990 Ford F-250 - as i do with every tranny i went ahead and installed a TransGo reprogramming/shift kit. while i was at it i also did it in my friends 04 F1… 1990 Ford F-250 - added an electric fan for the A/C condenser. wired it and the A/C clutch to a relay 1990 Ford F-250 - all new A/C setup. new condenser, evaporator, accumulator, custom lines. cycling switch and high pressure snesor are wired to a a relay whi… 1990 Ford F-250 - all new A/C setup. new condenser, evaporator, accumulator, custom lines. cycling switch and high pressure snesor are wired to a a relay whi… 1990 Ford F-250 - Curt C15300 16k pound receiver 1990 Ford F-250 - Curt C15300 16k pound receiver 1990 Ford F-250 - i originally used a battery cable to connect the battery to the alternator which deleted the factory fuse-able link. while it worked great… 1990 Ford F-250 - i originally used a battery cable to connect the battery to the alternator which deleted the factory fuse-able link. while it worked great… 1990 Ford F-250 - parts to rebuild the 10.25". want to make the truck more for towing and help take stress off the engine and transmission. because i lost 4w… 1990 Ford F-250 - got the 10.25" rebuilt. everything went pretty smoothly. want to make the truck more for towing and help take stress off the engine and tra… 1990 Ford F-250 - mounted a brake controller in place of the ashtray so it will be hidden when not in use. 1990 Ford F-250 - Dana 50 third member regeared with Dana SVL 4.56 gears and a Yukon DuraGrip limited slip. the originally the truck was a Dana 44 and 4.10 r… 1990 Ford F-250 - swapping the D50 4.56 DuraGrip third member in. using a D50 stub shaft with c-clip eliminator spring in the slip yoke. on the D44HD/D50 F25… 1990 Ford F-250 - while i was installing my vinyl flooring, i ran speaker wire under it so i can add a pair of rear speakers to the truck. i added a pair of… 1990 Ford F-250 - replaced my old 130amp alternator for a Tuff Stuff 7787F 225amp alternator. wanted the extra power to help power my winch i did have to swa… 1990 Ford F-250 - dual Firestick 3' antennas for my CB radio i tried running both antenna together but the SWR was terrible. so instead i have one antenna tu… 1990 Ford F-250 - I added a CB radio behind the passenger seat near my stereos amplifier. its easy to access but hidden enough to not get in the way. 1990 Ford F-250 - i added a 4-channel 100w each amplifier behind the passenger seat. i like my music loud and it helps with the distortion using the headunit…