11.JPG
1943 hits | 85.58 KB | Posted: 2/22/12
Push-Down Shifter Installation

The wells in the outer boot bezel ([url=https://www.amazon.com/dp/B0...

01.JPG
1496 hits | 60.76 KB | Posted: 2/22/12
This style of shifter is known to seize & break, and its proper use isn't intuitive (despite the ins...

10Dirt.JPG
1274 hits | 94.61 KB | Posted: 3/15/12
This is a VERY common problem with this style of shifter: the boots crack, allowing water & dirt ins...

02.JPG
1378 hits | 49.06 KB | Posted: 2/22/12
Push-Down Shifter Parts

Recently, Dorman has begun offering this shifter as 600-602; ~$90 on [url...

03.JPG
1090 hits | 42.85 KB | Posted: 2/22/12
To begin, carefully cut the nylon zip-ties around the rubber boots, being careful not to cause furth...

11Split.JPG
1126 hits | 76.82 KB | Posted: 3/15/12
The upper boot cracks similarly.

12Split.JPG
1040 hits | 81.81 KB | Posted: 3/15/12
The upper boot cracks similarly.

13Splits.JPG
1039 hits | 68.69 KB | Posted: 3/15/12
Both cracks have torn halfway round. Replacement boots are NOT available, but Dorman has recently b...

04.JPG
1035 hits | 39 KB | Posted: 2/22/12
Clean enough dirt away to allow the o-rings to be slid out of their grooves & off the pin.

05.JPG
1050 hits | 39.96 KB | Posted: 2/22/12
If the shifter is seized, soak it with penetrating oil and carefully tap it down with a SMALL hammer...

06.JPG
1031 hits | 41.8 KB | Posted: 2/22/12
The shaft can now be rotated (if necessary) to withdraw it from the shift lever tube. Collect the l...

07.JPG
983 hits | 79.72 KB | Posted: 2/22/12
Gently pry each retainer tab up SLIGHTLY to reduce its grip on the shaft, then slide it off the shaf...

08.JPG
983 hits | 73.13 KB | Posted: 2/22/12
Slide the top bushing, top boot, & top o-ring off the shaft.

Recently, Dorman has begun offering ...

14Shaft.JPG
978 hits | 79.22 KB | Posted: 3/15/12
This shaft hasn't rusted severely yet, and it hadn't even jammed. But it would have...

09.JPG
1085 hits | 51.27 KB | Posted: 2/22/12
Clean, repair, and lubricate all parts as needed, then reassemble in reverse order.

If the boots ...

T-Case Shifter 87-96.jpg
2341 hits | 51.3 KB | Posted: 9/11/04
SOLD T-Case shift lever for 87-89

'90-96 use a lever with a round base, and a knob that says "...

T-Case Shifter 87-96.jpg
4831 hits | 40.29 KB | Posted: 3/5/05
SOLD T-Case Shifter '92-96

[url=http://www.supermotors.net/registry/media/249572][img]http://www.su...

T-shifterBoot.JPG
1711 hits | 55.6 KB | Posted: 7/13/07
SOLD Shift Boot for '87-96 Transfer Case
(SEE THIS PIC: http://www.supermotors.net/vehicles/registr...

TcaseShiftBoot.JPG
1665 hits | 71.74 KB | Posted: 10/20/07
SOLD T-case Shift Boot & Bezel fits '87-96 (side of the hump)

ShifterBolts.JPG
660 hits | 120.22 KB | Posted: 9/3/14
SOLD '92-96 BW1356 Shifter Bolts

Shifter94BW1356AODEW.JPG
1481 hits | 48.26 KB | Posted: 8/20/11
SOLD T-case Shifter for '92-96 BW1356 with mounting plate & link bar for 4R70W
IF THE IMAGE IS TOO S...