Steve83 > 1975 Ford Bronco > open folder Interior Panels

The speaker hole had already been hacked before he bought the truck, so as much as I hated to do it,...
L01Door.JPG
2794 hits | 59.76 KB | Posted: 3/2/07
The speaker hole had already been hacked before he bought the truck, so as much as I hated to do it,...
I built the panel from 2 layers of 1/4" hardboard & glued them together. The notch at the bo...
R02xPanels.JPG
1437 hits | 65.92 KB | Posted: 11/14/11
I built the panel from 2 layers of 1/4" hardboard & glued them together. The notch at the bo...
The steel top lip wraps up to the glass, like modern door panels. When the panel is adjusted correc...
L18Fit.JPG
2511 hits | 52.7 KB | Posted: 3/2/07
The steel top lip wraps up to the glass, like modern door panels. When the panel is adjusted correc...
I'm pretty happy with my first attempt at upholstery, even with the slight wrinkles at the bottom. ...
L42Wrinkles.JPG
2152 hits | 32.16 KB | Posted: 3/2/07
I'm pretty happy with my first attempt at upholstery, even with the slight wrinkles at the bottom. ...
The '88 trim pieces look pretty good, but I butchered the switch opening, so I'm definitely redoing ...
L43Trimmed.JPG
2123 hits | 34.45 KB | Posted: 3/2/07
The '88 trim pieces look pretty good, but I butchered the switch opening, so I'm definitely redoing ...
I think it looks D@# good already, so the final version should be great. I still have to find a pul...
L45Speaker.JPG
2471 hits | 52.47 KB | Posted: 3/2/07
I think it looks D@# good already, so the final version should be great. I still have to find a pul...
I managed to lift the speaker so it's not ON the floor now, but it's still low. I'd really rather h...
L47FloorF.JPG
2174 hits | 57.35 KB | Posted: 3/2/07
I managed to lift the speaker so it's not ON the floor now, but it's still low. I'd really rather h...
Why didn't they do it this way to begin with?
L48Dash.JPG
2080 hits | 30 KB | Posted: 3/2/07
Why didn't they do it this way to begin with?
This is the finished panel, other than the grab handle. The latch & screw holes are melted so they ...
L49Recovered.JPG
2106 hits | 23.22 KB | Posted: 3/3/07
This is the finished panel, other than the grab handle. The latch & screw holes are melted so they ...
All this one needs is a grab handle, and it's done. ...and maybe some puddle lights, a pocket...
L50Installed.JPG
2153 hits | 93.48 KB | Posted: 3/3/07
All this one needs is a grab handle, and it's done.



...and maybe some puddle lights, a pocket...
I found a grab handle that we both liked, and it's on. I think it came from an Expedition. The ins...
L53Grab.JPG
5874 hits | 77.51 KB | Posted: 3/8/07
I found a grab handle that we both liked, and it's on. I think it came from an Expedition. The ins...
I've managed to do something that NO car manufacturer seems to be able to accomplish: attaching a do...
L54Grab.JPG
2433 hits | 74.16 KB | Posted: 3/8/07
I've managed to do something that NO car manufacturer seems to be able to accomplish: attaching a do...
I found a grab handle that we both liked, and it's on.
L57Grab.JPG
2294 hits | 28.57 KB | Posted: 3/8/07
I found a grab handle that we both liked, and it's on.
This door's speaker hole was butchered even worse, and it's not in the same position, so I have to c...
R01Door.JPG
2408 hits | 60.8 KB | Posted: 3/25/07
This door's speaker hole was butchered even worse, and it's not in the same position, so I have to c...
This one went much faster, naturally.
R07.JPG
2536 hits | 73.26 KB | Posted: 3/25/07
This one went much faster, naturally.
It doesn't fit quite as well as I had hoped, but it still looks better than stock or the diamond-pla...
BedL07.JPG
3489 hits | 41.8 KB | Posted: 4/2/07
It doesn't fit quite as well as I had hoped, but it still looks better than stock or the diamond-pla...
The speaker BARELY fits. In fact, I'm not happy with how little material there is between it & the ...
BedL09.JPG
4167 hits | 78.66 KB | Posted: 4/2/07
The speaker BARELY fits. In fact, I'm not happy with how little material there is between it & the ...
A Bronco cargo light, right where it should be.[url=http://www.supermotors.net/registry/media/2820...
BedL12.JPG
3249 hits | 71.37 KB | Posted: 4/3/07
A Bronco cargo light, right where it should be.

[url=http://www.supermotors.net/registry/media/2820...
This one's upholstery is tighter, but the panel doesn't fit as well as the L side. Oh, well - you c...
BedR05.jpg
3091 hits | 40.08 KB | Posted: 4/3/07
This one's upholstery is tighter, but the panel doesn't fit as well as the L side. Oh, well - you c...
Since the Rhino-Liner is now covered with Dynamat Xtreme, the Dynamat will be covered the way full-s...
CamperTrim01.JPG
3933 hits | 51.21 KB | Posted: 5/4/08
Since the Rhino-Liner is now covered with Dynamat Xtreme, the Dynamat will be covered the way full-s...
Since the Rhino-Liner is now covered with Dynamat Xtreme, the Dynamat will be covered the way full-s...
CamperTrim06.JPG
2244 hits | 54.21 KB | Posted: 5/4/08
Since the Rhino-Liner is now covered with Dynamat Xtreme, the Dynamat will be covered the way full-s...
The driver's side camper window trim is pretty much done - I might have to remake the bottom piece. ...
CamperTrim09.JPG
3577 hits | 38.46 KB | Posted: 5/10/08
The driver's side camper window trim is pretty much done - I might have to remake the bottom piece. ...
The driver's side window trim is pretty much done - I might have to remake the bottom piece. But ov...
CamperTrim08.JPG
2332 hits | 39.95 KB | Posted: 5/10/08
The driver's side window trim is pretty much done - I might have to remake the bottom piece. But ov...
I dimpled the lower trim behind the cage bar when I installed it, but I'll push it back out when I h...
CamperTrim12.JPG
2290 hits | 36.46 KB | Posted: 6/1/08
I dimpled the lower trim behind the cage bar when I installed it, but I'll push it back out when I h...
I finally finished the camper trim by wrapping it in the same upholstery that covers the doors & bed...
CamperTrim178.JPG
2210 hits | 39.35 KB | Posted: 9/17/09
I finally finished the camper trim by wrapping it in the same upholstery that covers the doors & bed...
In preparation for adding a trim panel over the liftgate, I reattached this seal. Originally, it wa...
LiftgateSeal.JPG
2309 hits | 30.77 KB | Posted: 9/12/10
In preparation for adding a trim panel over the liftgate, I reattached this seal. Originally, it wa...
I think this is the last piece of interior trim (other than the floor console), so now ~99.9% of the...
CamperTrim21.JPG
1636 hits | 63.32 KB | Posted: 9/17/10
I think this is the last piece of interior trim (other than the floor console), so now ~99.9% of the...
I think this is the last piece of interior trim (other than the floor console), so now ~99.9% of the...
CamperTrim22.JPG
1430 hits | 59.19 KB | Posted: 9/17/10
I think this is the last piece of interior trim (other than the floor console), so now ~99.9% of the...
I think this is the last piece of interior trim (other than the floor console), so now ~99.9% of the...
CamperTrim23.JPG
1590 hits | 60.04 KB | Posted: 9/17/10
I think this is the last piece of interior trim (other than the floor console), so now ~99.9% of the...