SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1980-1986/ “zeus”/ axels supermotors.net/registry/4309/16071

Album section

axels

From 1983 Ford Bronco “zeus”, documented by hal lind.

31 photos
← Back to this vehicle
1983 Ford Bronco - starting the cleanup/teardown 1983 Ford Bronco - 14bolt on the way home. 1983 Ford Bronco - the 60 came complete with springs and steering 1983 Ford Bronco - A disassembled front axle laid out on a wooden pallet in a warehouse, with the housing, brake backing plates, rusty rotors, tie rod and loo… 1983 Ford Bronco - Rear axle housing with the differential cover removed, showing the ring gear and carrier with its bearing caps and brake lines still routed… 1983 Ford Bronco - A rebuilt solid axle housing painted flat black, shown end-on across a forklift's forks with red rags padding the tubes and plastic taped o… 1983 Ford Bronco - A freshly painted flat-black solid axle housing rests on wood cribbing and red shop rags, its bolt-on differential cover and taped tube end… 1983 Ford Bronco - bare 60 1983 Ford Bronco - Close-up of an axle tube end and knuckle C being set up for welding, with the joint wrapped in aluminum tape and squared against a wood blo… 1983 Ford Bronco - A rusty Dana-style solid front axle housing center section lying on a concrete garage floor, its differential pinion snout and cast tube st… 1983 Ford Bronco - Looking down a rusty axle tube at a cast spring perch and the knuckle C-end tacked in place, with chalk lines and tack welds marking the se… 1983 Ford Bronco - taking off swaybar bracket 1983 Ford Bronco - Tight close-up of a rusty steel sleeve welded onto an axle tube, with fresh stack-of-dimes weld beads running around both ends of the sleev… 1983 Ford Bronco - cleaned up. a little primer to keep off the rust 1983 Ford Bronco - ready to hit with the wire wheel and paint. 1983 Ford Bronco - A rear axle assembly with oversized tires is being moved by a forklift in a workshop. 1983 Ford Bronco - A complete solid front axle assembly with mud-terrain tires mounted on both ends, lifted on the forks of a green forklift inside a warehous… 1983 Ford Bronco - Close-up of an oversized off-road tire with a chunky block tread pattern, standing upright with a yellow tape measure extended vertically u… 1983 Ford Bronco - A tape measure stretched across a rusty cast axle housing and its steel tube, checking a dimension during a driveline mock-up on a shop flo… 1983 Ford Bronco - A Super Swamper TSL/SX mud tire mounted on a black 8-lug steel wheel, standing on a warehouse floor next to a green forklift, with the side… 1983 Ford Bronco - ready for paint 1983 Ford Bronco - painted and ready to reasemble 1983 Ford Bronco - Close-up of a freshly painted black axle housing center section and axle tube, resting on a stand outdoors with a red shop rag draped over… 1983 Ford Bronco - A freshly painted black solid axle housing with high-pinion differential and inner axle shaft rests on a truck bed with a red shop rag, pho… 1983 Ford Bronco - Close-up along a black-painted axle housing showing the differential casting, welded truss seam and pinion snout, with a lifted red and bla… 1983 Ford Bronco - A pair of Warn locking hubs still in their box sits beside two front axle shafts with U-joint yokes, one used and one new in plastic wrap,… 1983 Ford Bronco - Two axle shafts with U-joint yokes laid side by side on a white surface for comparison, the used one at top still has its slinger and oil-s… 1983 Ford Bronco - Close-up of a new bare-steel differential carrier case still in its oiled plastic packaging, showing the ring-gear bolt flange, machined be… 1983 Ford Bronco - Close-up of a greasy black round automotive pulley or harmonic damper with concentric belt grooves and a central hub, laid on a white cloth… 1983 Ford Bronco - A blurry close-up of oily, greasy cast-iron driveline or axle parts, a machined flange and shaft-like casting with a bolt hole, resting on… 1983 Ford Bronco - Extreme close-up of a greasy round cast-iron housing removed from a driveline, laid on a white cloth. A machined center bore with an intern…