SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1978-1979/ 1978 Bronco/ Twin-Stick supermotors.net/registry/4586/16194

Album section

Twin-Stick

From 1978 Ford Bronco, documented by Mario Brown.

17 photos
← Back to this vehicle
1978 Ford Bronco - Stock shift rail with markings 1978 Ford Bronco - Extended notches 7/16's or ~0.40 inchs 1978 Ford Bronco - Twin stick kit from JKW Offroad for Ford np 205 1978 Ford Bronco - The I.D. of the bottom of the shifters does not fit on the stock bolt located on the side of the intermediate housing. I am looking for ano… 1978 Ford Bronco - T-case inards waiting for a clean case. 1978 Ford Bronco - Case + idler gear waiting for 1-5/16 socket. I eventually found a 33mm socket for 1/2 drive for cheap and its same size. 1978 Ford Bronco - Freshly painted case. POR-15 applyed with sponge brush. 1978 Ford Bronco - Torque to 90-130 ft-lbs. When assembling the idler gear assmbely I put the four spacers on the front output yoke side, of the spacer. 1978 Ford Bronco - Housing painted and shifters installed on bolt to test play and fit. 1978 Ford Bronco - Instead of finding a bolt and spacer, i just reamed out the hole on the shifter, using a 3/4 inch size drill bit, you can prolly grind it d… 1978 Ford Bronco - I added a spacer in between the sticks and housing to protect them, but i did not find a way to add a plastic sleeve in between the bolt an… 1978 Ford Bronco - Mock setup on t-case, every thing fits great, and works smooth, I still have to assemble the rest of the case. 1978 Ford Bronco - I used brass punches to act as the roll pins provided with the kit, as i have to take this all apart. 1978 Ford Bronco - Roll pins to secure linkage arm to shift rail. 1978 Ford Bronco - Transmission case painted, ready to be put together. 1978 Ford Bronco - Completed case 1978 Ford Bronco - Completed case