Picture 087.jpg
1240 hits | 77.49 KB | Posted: 4/8/04
Opened it up to check for dents, perfect

Picture 086.jpg
1067 hits | 67.23 KB | Posted: 4/8/04
Small wonder they don't get damaged with packing like this

Picture 085.jpg
1102 hits | 70.82 KB | Posted: 4/8/04
Really happy when I found no lower mirror bracket holes pre-drilled

Picture 088.jpg
1125 hits | 68.6 KB | Posted: 4/8/04
Once I get these new 96 mirrors on the new 86 doors, no lower holes to patch !

Picture 103.jpeg
1375 hits | 88.06 KB | Posted: 4/17/04
Sealing up the crimped edges on the new door shells. It's sandable and paintable and drys real quic...

Picture 105.jpeg
1222 hits | 59.55 KB | Posted: 4/17/04
Sound deadner going in. Work in the deep, hardest to get edges and angles first while you still hav...

Picture 004.jpg
1118 hits | 57.25 KB | Posted: 4/26/04
New JCW inner and outer door window wipe seals arrived today ! Dropped both door shells and fender ...

IMG_0160.JPG
1145 hits | 61.02 KB | Posted: 6/4/04
Yee haw ! Just got the new door shells back from the paint shop !

IMG_0170.JPG
1377 hits | 56.46 KB | Posted: 6/4/04
Think I'm going away from the Eddie Bauer tan for a while and try these chrome fender trim pieces an...

IMG_0175.JPG
1098 hits | 68.3 KB | Posted: 6/5/04
Whip off the inner panel, disconnect PDL, PW, switches and speaker. Note (4) 7/16" nuts, over handle...

IMG_0178.JPG
1044 hits | 56.75 KB | Posted: 6/5/04
This one 7/16" bolt holds the corner window frame to the door.

IMG_0179.JPG
1011 hits | 55.2 KB | Posted: 6/5/04
Other than that two philips go into the holes you see on the galvanized frame, through the top of th...

IMG_0180.JPG
1057 hits | 59.3 KB | Posted: 6/5/04
After the corner window, with it's frame, is out the big window is so loose in the door frame you ju...

IMG_0184.JPG
957 hits | 62.6 KB | Posted: 6/5/04
Look how easy those bolts and nuts were to remove. Forget putting rivets back, this way you can remo...

IMG_0185.JPG
1145 hits | 57.93 KB | Posted: 6/5/04
The outer window seal track is in the way of getting at everything lock or handle related. One bolt...

IMG_0188.JPG
1361 hits | 61.5 KB | Posted: 6/5/04
Now you can get at everything much more easily. Use this as a linkage guide, as nothing has been di...

IMG_0194.JPG
1129 hits | 44.95 KB | Posted: 6/5/04
Next out is the handle(save plastic gaskets) and lock cylinder with hold in clip. BTW my aftermarke...

IMG_0197.JPG
1207 hits | 41.34 KB | Posted: 6/5/04
Next out is the latch mechanism. These screws are almost always seized, so.... impact driver to the ...

IMG_0200.JPG
1167 hits | 63.24 KB | Posted: 6/5/04
It's worth mentioning this rod has to come out of the inner door handle before you can remove the la...

IMG_0201.JPG
1267 hits | 60.54 KB | Posted: 6/5/04
When you pull this latch mechanism out you will lose one or two rods down the door. Use the previou...

IMG_0204.JPG
1156 hits | 38.9 KB | Posted: 6/5/04
Somebody at FullsizeBronco.com suggested bungee cording the doors to the ceiling to hold them while ...

IMG_0229.JPG
1382 hits | 74.67 KB | Posted: 6/5/04
Newly painted new door shell hanging by bungees, ready to be bolted onto newly bushed and pinned hin...

IMG_0232.JPG
1239 hits | 54.35 KB | Posted: 6/5/04
Got this self adhesive 3M dense, spongy foam rubber really cheap. It should sound good behind each ...

IMG_0233.JPG
1203 hits | 32.6 KB | Posted: 6/5/04
It's a half inch thick and should also help sound deaden the doors a bit too, even though they alrea...

IMG_0248.JPG
1392 hits | 52.13 KB | Posted: 6/5/04
Perfectly lined up with the rear quarter body lines, the fender needs to come up a smidgeon, but tha...

IMG_0066.JPG
1252 hits | 89.68 KB | Posted: 9/4/04
There's the new doors, fenders and 96 style mirrors on the truck, sure needs quarters eh ? They're ...