SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
1979 Ford Bronco “Swamper”
Home/ Registry/ Ford/ Bronco/ 1978–1979/ “Swamper” supermotors.net/registry/5134

“Swamper”1979 Ford Bronco

11 photos documented since 2004 1 years documented ♡ Follow this build

The story

Truck sits on 36x13.50x16.5 Super Swamper IROK tires w/12x16.5 Mickey Thompson Classic 2 rims. It has 4"suspension lift & 3" body lift,Dual Rancho RS5000 shocks on each corner up front, single shocks in the rear, 5-peice clearance light set on top,Optima Yellow Top batteries, 200 amp alternator, custom built front & rear bumpers, diamond plate rear cargo panles,Pioneer DEH-P6400 headunit, Pioneer 300watt 2-way 6-1/2" front door speakers, Pioneer 200watt 6x9" rear speakers, 15" subwoffer in bandpass box, DHD 1000watt four channel amplifier powering speakers, I sanded/painted/buffed the interior and the exterior.Bought from my uncle who used it for a hunting buggy for 8 years, my dad and I totally redid it, now I drive it every day. — Greenbroncoguy

Photos

1979 Ford Bronco - My brand new 460. 470hp/527 ft. lbs. of torque. 1979 460 truck block bored .030" over to make 466 cid, 1970 DOVE-A closed chamber, "quench"… 1979 Ford Bronco - New rims and tires. Super Swamper Irok radials mounted on Mickey Thompson Classic 2's. 1979 Ford Bronco - Upfront after I redid all of the interior. New seats, carpet, paint, trim pieces, etc. All of the wiring was redone as well. Doors have 6 1… 1979 Ford Bronco - Backseat area after I redid the entire interior. That is 3/8" thick aluminum diamondplating used for the cargo area side panels, and Pionee… 1979 Ford Bronco - Front axle after gears, seals, bearings, axles, hubs and a paint job. The front end was totally taken apart and rebuilt, and has new Warn P… 1979 Ford Bronco - L&L fenderwell exit header install. Here you can see the Rancho 5000x shocks. I have the others to make the front quad shock, but I took th… 1979 Ford Bronco - My new 15 subwoffer in a ported box, driven by a 1000 watt DHD amplifier. Also notice the rear cargo panels made from 3/8" polished aluminu… 1979 Ford Bronco - New paintjob with Dupont basecoat/clearcoat. After painting the whole truck was wet sanded down and buffed for a show quality finish. All n… 1979 Ford Bronco - Completed front bumper, made by my father and I. The front bumper has aux head lights built into it that are turned on by a switch in the d… 1979 Ford Bronco - Completed rear bumper, also custom made by me and my dad. Has drilled & tapped holes for a tag, operating tag lights, and a receiver hitch… 1979 Ford Bronco - Another underhood pic. Here you can see the MSD 6A ignition box, MSD Blaster 2 coil, Ford Racing 9mm sparkplug wires, 2 of the largest Opti…

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.