i got a foot of EFI fuel hose and connected the pump so the sock…

i got a foot of EFI fuel hose and connected the pump so the sock filter would be in the same depth as the original. the rest i used to lower the return line to prevent any splashing i might hear whe the tank is low

i bought a section of small all-thread rod to use to support the pump. i cut it to size and then used 3 hose clamps to support it. 2 clamps on the motor and 1 clap on one of the tubes.

i installed the pump and everything worked like a charm. the pump is abit noisier than stock but i dont hear it once the engine is running

BE SURE TO USE EFI FUEL HOSE. REGULAR FUEL HOSE IS NOT RATED FOR HIGH PRESSURE

Owner caption January 2017 · Photo 151 of 406