Atwood G6A-8E WIN RV Water Heater Data Plate - 6 Gal LP Gas Specs

This is a photograph of the manufacturer data/spec plate on an Atwood automatic storage water heater installed in a recreational vehicle (uploaded to the gallery of a 2015 Ford F-550, likely a truck camper or RV build). The label identifies the unit as Atwood model G6A-8E WIN, serial number 9622803061178, with a spec date of 12/18/14. Key specifications shown: 6 U.S. gallon capacity, 8,800 BTU/HR input, 7.40 GAL/HR recovery rate, maximum inlet gas pressure 13" W.C., minimum inlet gas pressure 11" W.C., and 10" W.C. manifold pressure for input adjustment. The plate states a maximum working pressure of 150 PSI and test pressure of 300 PSI, notes the heater is for use with LP (propane) gas only and suitable for potable water heating only, and that the design complies with ANSI Z21.10.1A-2009 / CSA 4.1A-2009 for direct vent installation in a recreational vehicle. Safety text warns against storing or using gasoline or flammable liquids near the appliance. The unit is CSA design certified and manufactured by Atwood Mobile (Greenbrier, TN). A partially visible service sticker (MPD 93809) referencing the circuit board is above the main plate. This plate is useful for ordering parts, verifying gas pressures, and identifying the exact water heater model.