Home/ Registry/ Ford/ Crown Victoria/ 1992-1997/ “Vicky (totalled & shredded)”/ Photo supermotors.net/registry/media/192814

4R70W transmission shift linkage diagram dated 1998 with cable a…

‹ ›

DiagramsView all 207

AODE valve body installation diagram with bolt torque sequence numbers

Exploded parts diagram of a 1998 4R70W automatic transmission

4R70W transmission electronic controls diagram with sedan and labeled sensors

1998 4R70W transmission cutaway and valve body internal component diagram

4R70W transmission valve body bolt torque sequence diagram, 25 bolts

Diagram comparing 1995-2001 dual and single exhaust system layouts

Cutaway diagram of a torque converter labeling impeller, turbine, reactor and input shaft

207photos in this albumView all

4R70W Shifter Adjustment
23. From inside the vehicle, place the gearshift lever in the DRIVE or OVERDRIVE position. Hang a three-pound weight on the gearshift lever.
24. Raise the vehicle.
25. Remove the shift cable from the transmission lever ball stud. Pull down on the lock tab on the shift cable body. Position the gearshift lever in the DRIVE or OVERDRIVE position (three detents from front-most lever position, with the first position counted as one). Connect the cable end fitting to the transmission lever ball stud. Push up on the lock tab to lock the cable in the correctly adjusted position.
26. Lower the vehicle.
27. Remove the three-pound weight.

Owner caption April 2005 · Photo 402 of 980