Close-up of mounting holes and a bracket plate inside a body pan…

Close-up of mounting holes and a bracket plate inside a body panel Hand-drawn engineering sketch of a hinge bracket and rear door layout Interior rear quarter panel and window of a vehicle with carpet trim Two-pin electrical connector held with masking tape inside a vehicle Underside view of a black stamped metal bracket or skid plate Set of mounting holes on a dark panel marked with masking tape GM Chevrolet body trim and paint plate riveted to red bodywork, trim 416 Chrome AC RC33 15 lb closed-system radiator cap stamped DO NOT OPEN, on gray background ACDelco battery installed in a vehicle with red positive and black negative cables Copper L-shaped bracket with two holes resting on blue and white patterned fabric 1973 Corvette engine bay with red arrows labeling wire hold clips on the valve cover Close-up of engine bay showing a vacuum actuator connected to hoses and wiring Car interior showing brake and accelerator pedals with black hoses and wiring attached 1973 Chevrolet Corvette interior footwell with pedals and floor mat Engine bay close-up of hoses, clamps, and a sensor with a green wire Close-up of gray plastic mesh screen over engine bay components, blue panel edge at top right 39photos in this albumView all