Home/ Registry/ BMW/ R1100GS ABS/ 1998 BMW R1100GS ABS/ Photo supermotors.net/registry/media/610127

Cardboard rack template mocked up on BMW motorcycle tail with Co…

‹ ›

Rear RackView all 18

Cut cardboard template with folded flange and a tape measure on beige carpet

Cardboard mockup template marked 10 inches by 12 inches with a red tape measure extended across it

Cardboard rack template marked 10 and 12 inches with a red Craftsman tape measure

Trapezoidal cardboard rack template with pencil marks laid on beige carpet

Hand holding a folded cardboard mockup panel with a duct-taped bent lower edge

Cardboard rack template test-fitted on BMW motorcycle tail with orange hard case above

Cardboard fabrication template marked 10 inches and 12 inches on a workbench

Cut sheet-metal blank on a steel workbench with welding gauges below

Bare cut sheet-metal rack plate with bent lip lying on a workbench

Unpainted metal rack plate on the rear of a black BMW motorcycle with Colorado 208-PRU plate

Rear of a black BMW motorcycle with a bare metal rack plate mock-up above the taillight and Colorado plate

Bare sheet-metal luggage rack fitted to BMW motorcycle tail between hard saddlebags

Bare metal rack plate test-fitted on the tail of a black BMW motorcycle with Colorado plate

Close-up of a motorcycle's rear rack and luggage, with a red taillight and license plate visible

18photos in this albumView all

Rear view of a BMW motorcycle tail section in a garage, with a cardboard mock-up template laid across the luggage rack area above the taillight, amber turn signals and a Colorado plate reading 208-PRU with a 2008 sticker.

AI caption February 2008 · Photo 27 of 294

Is this accurate? Sign in to help verify it.

Comments

No comments yet.

More BMW R1100GS ABSs

1996 BMW R1100GS ABS “Old Faithfull”2 photos

The BMW R1100GS ABS registry