Home/ Registry/ BMW/ R1100GS ABS/ 1998 BMW R1100GS ABS/ Photo supermotors.net/registry/media/610467

Cut sheet-metal blank on a steel workbench with welding gauges b…

‹ ›

Rear RackView all 18

Cardboard mockup template marked 10 inches by 12 inches with a red tape measure extended across it

Cardboard rack template marked 10 and 12 inches with a red Craftsman tape measure

Trapezoidal cardboard rack template with pencil marks laid on beige carpet

Hand holding a folded cardboard mockup panel with a duct-taped bent lower edge

Cardboard rack template test-fitted on BMW motorcycle tail with orange hard case above

Cardboard rack template mocked up on BMW motorcycle tail with Colorado plate

Cardboard fabrication template marked 10 inches and 12 inches on a workbench

Bare cut sheet-metal rack plate with bent lip lying on a workbench

Unpainted metal rack plate on the rear of a black BMW motorcycle with Colorado 208-PRU plate

Rear of a black BMW motorcycle with a bare metal rack plate mock-up above the taillight and Colorado plate

Bare sheet-metal luggage rack fitted to BMW motorcycle tail between hard saddlebags

Bare metal rack plate test-fitted on the tail of a black BMW motorcycle with Colorado plate

Close-up of a motorcycle's rear rack and luggage, with a red taillight and license plate visible

18photos in this albumView all

A cut rectangular sheet of galvanized/aluminum plate resting on a dark steel workbench, its scuffed surface catching the shop light, with a green welding regulator and gauges visible at the lower edge.

AI caption February 2008 · Photo 29 of 294

m. w...

Is this accurate? Sign in to help verify it.

Comments

No comments yet.

More BMW R1100GS ABSs

1996 BMW R1100GS ABS “Old Faithfull”2 photos

The BMW R1100GS ABS registry