What is the cylinder head bolt torque spec shown in this diagram?

103–113 Nm (76–83 ft.lbs.), specified for a cold engine.

What sealant does the diagram call for on the rocker cover?

3M ATD Part No. 8660 or equivalent, applied in 10 mm (.4 in.) sections at the points shown in the inset.

What are the exhaust manifold-area fastener torques shown?

The diagram shows 19 Nm (13 ft.lbs.), 24 Nm (17 ft.lbs.), and 25 Nm (18 ft.lbs.) for the lower manifold/bracket fasteners, and 12–15 Nm (9–11 ft.lbs.) for the heat protector.

What torque is specified for the alternator mounting hardware?

Callouts near the alternator show 20–25 Nm (14–18 ft.lbs.), 10 Nm (7 ft.lbs.), 13 Nm (9 ft.lbs.), and 5 Nm (4 ft.lbs.).

Which parts are marked with an 'N' symbol?

Items 8 and 12 (and one small item near item 7) carry an 'N' box, indicating specially designated (typically non-reusable) parts such as the cylinder head gasket.

Home/ Registry/ Mitsubishi/ Montero/ “P”/ Photo supermotors.net/registry/media/723589

2000 Mitsubishi Montero Right Bank Cylinder Head Torque Specs Exploded Diagram

Exploded intake/exhaust manifold parts diagram, right bank, with torque specs in Nm and ft-lbs

‹ ›

Exploded parts breakdown of the right-bank manifold assembly with numbered components and torque specifications.

AI caption April 2009 · Photo 221 of 299

This document is an exploded parts diagram labeled "<Right bank>" showing the disassembly/reassembly of components on the right cylinder bank of a V-type engine, uploaded to a 2000 Mitsubishi Montero gallery. The diagram illustrates numbered components (1 through 12) including what appear to be the alternator/generator with its bracket, engine hangers, rocker cover, cylinder head, cylinder head gasket, exhaust manifold, heat protectors, and related brackets. Torque specifications are called out for each fastener: 5 Nm (4 ft.lbs.), 9 Nm (7 ft.lbs.), 10 Nm (7 ft.lbs.), 13 Nm (9 ft.lbs.), 12–15 Nm (9–11 ft.lbs.) in two locations, 19 Nm (13 ft.lbs.), 24 Nm (17 ft.lbs.), 25 Nm (18 ft.lbs.), and 20–25 Nm (14–18 ft.lbs.). Cylinder head bolts are specified at 103–113 Nm (76–83 ft.lbs.) with a cold engine. Items 8 and 12 are marked with "N" boxes (typically indicating parts not to be reused). An inset shows sealant application to the rocker cover, calling for a 10 mm (.4 in.) bead at specified points and specifying 3M ATD Part No. 8660 or equivalent. Drawing reference numbers 01W595, 01E0007, and 00002769 appear on the figure.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What is the cylinder head bolt torque spec shown in this diagram?: 103–113 Nm (76–83 ft.lbs.), specified for a cold engine.
What sealant does the diagram call for on the rocker cover?: 3M ATD Part No. 8660 or equivalent, applied in 10 mm (.4 in.) sections at the points shown in the inset.
What are the exhaust manifold-area fastener torques shown?: The diagram shows 19 Nm (13 ft.lbs.), 24 Nm (17 ft.lbs.), and 25 Nm (18 ft.lbs.) for the lower manifold/bracket fasteners, and 12–15 Nm (9–11 ft.lbs.) for the heat protector.
What torque is specified for the alternator mounting hardware?: Callouts near the alternator show 20–25 Nm (14–18 ft.lbs.), 10 Nm (7 ft.lbs.), 13 Nm (9 ft.lbs.), and 5 Nm (4 ft.lbs.).
Which parts are marked with an 'N' symbol?: Items 8 and 12 (and one small item near item 7) carry an 'N' box, indicating specially designated (typically non-reusable) parts such as the cylinder head gasket.