SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Home/ Registry/ Ford/ F-100/ 1953-1956/ 1954 Ford F-100/ Photo supermotors.net/registry/media/768741

10-21-08: I've been stuck working on everyones vehicles but m…

10-21-08:    I've been stuck working on everyones vehicles but my own the past few days. So today I finally was able to do a little more on the 54. I was finally able to cut the end pieces for my floor crossmember ( took a couple trys before I got it right  :oops:  ) . My band saw was refusing to make a straight cut And I didn't have a chop saw so I used my 4 1/2" grinder with a cut off wheel to make the cuts. Once I made the cuts I used the grinder to clean up the edges and I also beveled the edges. Then I finally got the crossmember welded in! :D
10-21-08: I've been stuck working on everyones vehicles but my own the past few days. So today I finally was able to do a little more on the 54. I was finally able to cut the end pieces for my floor crossmember ( took a couple trys before I got it right :oops: ) . My band saw was refusing to make a straight cut And I didn't have a chop saw so I used my 4 1/2" grinder with a cut off wheel to make the cuts. Once I made the cuts I used the grinder to clean up the edges and I also beveled the edges. Then I finally got the crossmember welded in! :DOriginal file
10-21-08:    I've been stuck working on everyones vehicles but my own the past few days. So today I finally was able to do a little more on the 54. I was finally able to cut the end pieces for my floor crossmember ( took a couple trys before I got it right  :oops:  ) . My band saw was refusing to make a straight cut And I didn't have a chop saw so I used my 4 1/2" grinder with a cut off wheel to make the cuts. Once I made the cuts I used the grinder to clean up the edges and I also beveled the edges. Then I finally got the crossmember welded in! :D

10-21-08: I've been stuck working on everyones vehicles but my own the past few days. So today I finally was able to do a little more on the 54. I was finally able to cut the end pieces for my floor crossmember ( took a couple trys before I got it right ) . My band saw was refusing to make a straight cut And I didn't have a chop saw so I used my 4 1/2" grinder with a cut off wheel to make the cuts. Once I made the cuts I used the grinder to clean up the edges and I also beveled the edges. Then I finally got the crossmember welded in!

Owner caption · Photo 78 of 591

Is this accurate? Sign in to help verify it.

Comments

No comments yet.

More 1953-1956 F-100s