SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Home/ Registry/ Ford/ F-150/ 1992-1996/ “Ol' Blue”/ Photo supermotors.net/registry/media/866695

This is after removing the throttle cover, the PCV & breather ho…

This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacuum lines from the tree, the intake hoses (8mm), the throttle cable from its ball, the CANP hoses & connector, the TPS/EVP/EVR/TAB/TAD connectors, the EGR flare nut (27mm), the L intake support (9/16"), the combination valve & TAD pipe nuts (1/2"), and seven intake manifold bolts (1/2").  I still have to remove the EVR/TAB/TAD bracket (11mm) & fuel supply line to get the valve cover off.

SEE THE NEXT PIC...
This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacuum lines from the tree, the intake hoses (8mm), the throttle cable from its ball, the CANP hoses & connector, the TPS/EVP/EVR/TAB/TAD connectors, the EGR flare nut (27mm), the L intake support (9/16"), the combination valve & TAD pipe nuts (1/2"), and seven intake manifold bolts (1/2"). I still have to remove the EVR/TAB/TAD bracket (11mm) & fuel supply line to get the valve cover off. SEE THE NEXT PIC...Original file
This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacuum lines from the tree, the intake hoses (8mm), the throttle cable from its ball, the CANP hoses & connector, the TPS/EVP/EVR/TAB/TAD connectors, the EGR flare nut (27mm), the L intake support (9/16"), the combination valve & TAD pipe nuts (1/2"), and seven intake manifold bolts (1/2").  I still have to remove the EVR/TAB/TAD bracket (11mm) & fuel supply line to get the valve cover off.

SEE THE NEXT PIC...

This is after removing the throttle cover, the PCV & breather hose from their grommets, all the vacuum lines from the tree, the intake hoses (8mm), the throttle cable from its ball, the CANP hoses & connector, the TPS/EVP/EVR/TAB/TAD connectors, the EGR flare nut (27mm), the L intake support (9/16"), the combination valve & TAD pipe nuts (1/2"), and seven intake manifold bolts (1/2"). I still have to remove the EVR/TAB/TAD bracket (11mm) & fuel supply line to get the valve cover off.

SEE THE NEXT PIC...

Owner caption · Photo 78 of 202

Is this accurate? Sign in to help verify it.

Comments

No comments yet.

More 1992-1996 F-150s