SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “Big '92”/ Photo supermotors.net/registry/media/966347

needed to get these wires through the firewall, got a hole saw a…

needed to get these wires through the firewall, got a hole saw and opened up the clutch plate blank, the got a piece of pvc and was able to thread in the whole. It's not the entire way through the firewall, but it should do the trick. I used a foot pad from an old air compressor to block off the opening.
needed to get these wires through the firewall, got a hole saw and opened up the clutch plate blank, the got a piece of pvc and was able to thread in the whole. It's not the entire way through the firewall, but it should do the trick. I used a foot pad from an old air compressor to block off the opening.Original file
needed to get these wires through the firewall, got a hole saw and opened up the clutch plate blank, the got a piece of pvc and was able to thread in the whole. It's not the entire way through the firewall, but it should do the trick. I used a foot pad from an old air compressor to block off the opening.

Firewall Leak TroubleshootingView all 75

Close-up of engine bay firewall with bolts and wiring harness Close-up of engine bay wiring and firewall area with some rust and a water stain 1992 Ford Bronco photo Firewall grommet with red sealant and a bolt with red paint on its tip Close-up of automotive wiring harness and red sealant on rusty metal Close-up of rusted metal, wiring, and red sealant around a grommet on a vehicle's firewall close-up of wiring harness going through firewall grommet in engine bay 1992 Ford Bronco photo Engine bay with black hoses, wires, and a small air filter Close-up of a corroded window seal with visible rust and debris reflection of person's face and hand in windshield, bird flying outside 1992 Ford Bronco photo 1992 Ford Bronco photo 1992 Ford Bronco photo Close-up of a seam in a vehicle's engine bay, showing dirt and some rust 1992 Ford Bronco photo 75photos in this albumView all

needed to get these wires through the firewall, got a hole saw and opened up the clutch plate blank, the got a piece of pvc and was able to thread in the whole. It's not the entire way through the firewall, but it should do the trick. I used a foot pad from an old air compressor to block off the opening.

Owner caption · Photo 1159 of 2193

Is this accurate? Sign in to help verify it.

Comments

No comments yet.

More 1992-1996 Broncos

1992 Ford Bronco “badassbronco”1992 Ford Bronco “badassbronco”3,507 photos 1995 Ford Bronco “Bronco SOLD”1995 Ford Bronco “Bronco SOLD”1,762 photos 1996 Ford Bronco “boss”1996 Ford Bronco “boss”3,174 photos 1996 Ford Bronco1996 Ford Bronco1,029 photos 1993 Ford Bronco1993 Ford Bronco1,257 photos 1995 Ford Bronco “1995 Bronco XLT”1995 Ford Bronco “1995 Bronco XLT”965 photos
The 1992-1996 registry All Ford Broncos in the registry