SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
1989 Ford Bronco “Lil Devil”
Home/ Registry/ Ford/ Bronco/ 1987–1991/ “Lil Devil” supermotors.net/registry/19086

“Lil Devil”1989 Ford Bronco

63 photos documented since 2008 ♡ Follow this build

Photos

1989 Ford Bronco - Left Side of Steering Column 1989 Ford Bronco - Right Side of Steering Column 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco - Paint Stripper I used to strip the paint. This stuff works within minutes of you brushing it on the part you want stripped. You let it sit… 1989 Ford Bronco - Use a metal paint pan. The one in the picture is plastic and I used it for one side but it was trying to eat through the pan. Just pour in… 1989 Ford Bronco - Rear driver side. As you can see there is a small area that has to be repaired before I can continue. 1989 Ford Bronco - The bed of the truck, not to bad a little surface rust. Nothing that a wire brush and Rust Bullet can't handle. 1989 Ford Bronco - Rear passenger side. There is a big rust area in front of the rear wheel that will need to be fixed. 1989 Ford Bronco - Close up of the rust hole on the rear driver side. 1989 Ford Bronco - A little rust in the rear passenger side behind the taillight area. 1989 Ford Bronco - Rear passenger side rust holes. This is in front of the rear tire. 1989 Ford Bronco - One more rust hole on the rear passenger wheel tub. 1989 Ford Bronco - Bed area with a little surface rust, not to bad. 1989 Ford Bronco - Applied the paint stripper on the rear driver side. I tried to make sure I didn't put the stripper on the joint sealer. You can see once yo… 1989 Ford Bronco - Stripper doing it's job. I did this when it was still cool so it really did a good job of stripping. I saved hours and hours of trying to g… 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco - I applied the stripper to the back half of the truck. The bed will probably have to be redone once it cools off again. It appears the heat… 1989 Ford Bronco - The results of the stripper and a little of scrapping. I will hit it with a wire wheel just to clean up everything. My Scrapper can't hit a… 1989 Ford Bronco - The rear passenger side was done after the rear driver side and it appears it was starting to get a little to hot outside so it slowed the… 1989 Ford Bronco 1989 Ford Bronco 1989 Ford Bronco - A little more stripper when it's cooler outside and it should come off really easy. I think the wire wheel would clean it up pretty easy as… 1989 Ford Bronco - This is how the Bronco looked when I bought it, minus the mud. 1989 Ford Bronco - Umm, I got it stuck and my friend didn't want to get his new shoes muddy. 1989 Ford Bronco - After wheeling it and being stuck a few times. Those are not weeds under the Bronco, those are trophies. 1989 Ford Bronco - The Bronco with a 3" body lift and 33"x12.5"x15" TSL Super Swamppers. Now it's starting to look like a real 4x4 play toy. 1989 Ford Bronco - Driver side behind wheel tub. Rust area that was removed to do patch panel. 1989 Ford Bronco - The underside of the panel that was cut out. This had a mounting bracket that the gas filler tube was connected to. 1989 Ford Bronco - Gas filler tube with clamp that was connected to the bottom side of the panel I removed. 1989 Ford Bronco - You can see the the rust area was on the side panel so I had to remove a little of the vertical wall. This makes it a little tougher when i… 1989 Ford Bronco - You can see on the bottom of the picture I saved a 1/2" piece of metal to try and weld to. When I tried to do the weld myself I messed that…
Browse all 63 photos

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.