POWER SUPPLY ROUTING Fuse Check SEL27E Ii fuse is blown, be sure to eliminate cause of problem before installing new fuse. Use fuse of specified ratingt Never use fuse of more than specified rating. Do not install fuse in oblique direction; always insert it into fuse holder properly. Remove fuse for clack if vehicle is not used for a long period of time. Fusible Link A melted fusible link can be detected Either by visual inspection or by feeling with finger tip. If its condition is questionable, use circuit tester or test lampi Fusmlelmk shone CAUTION: a. If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is shorted. In such a case, care- fully check and eliminate cause of problem. b, Never wfap periphery of fusible link with vinyl tape. Extreme care should be taken with this link to ensure that it does not come into con- tact with any other wiring harness or vinyl or rubber parts. 2i,