File 268 of 431
Prev | Next

steeringwheel-3.jpg | Hits: 3661 | Posted on: 12/6/04 | View Low-Res

The white crescent-shaped turn signal cam commonly breaks, and you can see where I've spliced this one in by the red connector on the green wire in the top L corner of the photo. The bent bar in the middle of the photo is the release lever for the tilt mechanism. The peg at the 2:00 position (barely above the lock cylinder) is the steering wheel lock.

For turn signal/hazard switch replacement, see:


See also:
.