SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ 1993 Bronco/ Punisher Valve Body Install supermotors.net/registry/24017/78547

Album section

Punisher Valve Body Install

From 1993 Ford Bronco, documented by Dmanic.

14 photos
← Back to this vehicle
1993 Ford Bronco - So here%u2019s a quick write-up on installing Paul%u2019s Punisher valve body. I wasn%u2019t happy with the way my Bronco was shifting. It… 1993 Ford Bronco - First, as with anything you do on your Bronco. Unplug the negative battery terminal. You also do this to reset the computer, so it can lear… 1993 Ford Bronco - Pull the bolts from your transmission pan. I usually start by taking the ones completely out across the front, then drop the ones down the… 1993 Ford Bronco - I then remove the pan and pour the rest into the container. Next pull the filter from the transmission. You%u2019re probably going to get a… 1993 Ford Bronco - Make sure you carefully pull the filter O ring out from the transmission as well. Sometimes it gets stuck up in there. Usually you can pull… 1993 Ford Bronco - I usually clean out the pan and make sure there is not gasket left while the rest of the transmission fluid drips from the bottom into the… 1993 Ford Bronco - Once the filter is out, you can start pulling the bolts off the valve body. I counted 11 bolts and 2 nuts. 1993 Ford Bronco - Pull the old valve body out, and slide the new one in. Sorry I forget the torque specs, but I usually put them in finger tight, then start… 1993 Ford Bronco - Pull the old valve body out, and slide the new one in. Sorry I forget the torque specs, but I usually put them in finger tight, then start… 1993 Ford Bronco - Put your new filter in. this is the one I bought from napa. It comes with the pan gasket. There seems to be 2 styles of this filter%u2026 o… 1993 Ford Bronco - Put your new filter in. this is the one I bought from napa. It comes with the pan gasket. There seems to be 2 styles of this filter%u2026 o… 1993 Ford Bronco - I put the gasket on the pan and get it all lined up with a couple of bolts, then slide it back on. Again, putting all the bolts in finger t… 1993 Ford Bronco - Then I usually add about 4 or 5 quarts of transmission fluid to it, connect the negative battery terminal back up, start it up for a few se… 1993 Ford Bronco - Take it easy for the first few miles, until your computer relearns the shifting points, etc%u2026 and Paul recommends you give it about 50…