SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “B3”/ Superduty Axle swap supermotors.net/registry/25989/89142

Album section

Superduty Axle swap

From 1996 Ford Bronco “B3”, documented by Kingfish999.

21 photos
← Back to this vehicle
1996 Ford Bronco - 10.5" rear axle from a Superduty i got cheap from LKQ 1996 Ford Bronco - 05 Superduty Dana 60 i got from LKQ cheap 1996 Ford Bronco - 37x13.5 R17 Toyo Open Country M/T mounted on Mickey Thompson Baja 17x9 wheels. Balancing beads inside 1996 Ford Bronco - Regeared the 10.5" axle to 5.13 with new Ford e-locker. Also using a finned aluminum diff cover. Yukon gears and install kit, crush sleeve… 1996 Ford Bronco - Gear pattern of the 10.5" came out pretty good for 5.13 gear ratio 1996 Ford Bronco - Sketch level: Extreme removing the previous 10.25" axle 1996 Ford Bronco - 4.5" Shackle flip kit on rear leaf springs. Light Duty F250 leaf springs for 3" lift with same spring rate as bronco 2" Block kit Did have… 1996 Ford Bronco - All new rear brakes and wheel bearings 1996 Ford Bronco - 1350 Double Cardan driveshafts. Top is mine, bottom is a friends. Took stock Superduty front driveshafts. Had shortened to correct lengths… 1996 Ford Bronco - Goodbye 8-lug TTB. You will be missed. Was under all 3 of my broncos 1996 Ford Bronco - Dana 60 front axle under the truck Reusing my modified upper coil buckets. Modified the axle to use James Duff lower coil buckets and moved… 1996 Ford Bronco - I fabricated some radius arm mounts as an attempt to reuse the Superduty arms. The end goal will be DOM / Heim arms 1996 Ford Bronco - In order to try and gain some camber as easy as i can. I modified the stock Superduty arms so the upper axle mounting point is inward more… 1996 Ford Bronco - In order to try and gain some camber as easy as i can. I modified the stock Superduty arms so the upper axle mounting point is inward more… 1996 Ford Bronco - upper Tracbar mount using a James Duff trackbar mount used a Ruffstuff universal DOM / Heim tracbar kit. my tracbar limits my axle travel b… 1996 Ford Bronco - Front axle is now useable but will probably be changed up at some point. It does not drive very well in this current state. need to do some… 1996 Ford Bronco - Dana 60 was regeared to 5.13 gears and a Yukon Grizzly locker added. a strong iron Solid Axle Industries brand diff cover to protect from r… 1996 Ford Bronco - Ruffstuff universal DOM / Heim arm kit for Superduty axle swaps. Also an outriggers to mount to the frame in correct position because Super… 1996 Ford Bronco - This kit requires alot of welding for what seems pretty simple. But the kit works pretty good Dont judge my welds too bad, i did several pa… 1996 Ford Bronco - The kit is designed to weld the mounts directly to the frame. I decided i wanted it to be bolt-on to the frame instead. So i bought some 1/… 1996 Ford Bronco - Got the arms done. Because of the trans crossmember, i could not go full length of the kit but they are still plenty long. I did upgrade th…