SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “B3”/ Photo supermotors.net/registry/media/1171743

In order to try and gain some camber as easy as i can. I modifie…

In order to try and gain some camber as easy as i can. I modified the stock Superduty arms so the upper axle mounting point is inward more to increase caster.

To do so i cut a bit out of the top of the arms between the mounting tabs. i then weld a Grade 8 washer in the new location and drill a hole though the arm

I gained about 7* of caster with this modification and it worked very well
In order to try and gain some camber as easy as i can. I modified the stock Superduty arms so the upper axle mounting point is inward more to increase caster. To do so i cut a bit out of the top of the arms between the mounting tabs. i then weld a Grade 8 washer in the new location and drill a hole though the arm I gained about 7* of caster with this modification and it worked very wellOriginal file
In order to try and gain some camber as easy as i can. I modified the stock Superduty arms so the upper axle mounting point is inward more to increase caster.

To do so i cut a bit out of the top of the arms between the mounting tabs. i then weld a Grade 8 washer in the new location and drill a hole though the arm

I gained about 7* of caster with this modification and it worked very well

In order to try and gain some camber as easy as i can. I modified the stock Superduty arms so the upper axle mounting point is inward more to increase caster.

To do so i cut a bit out of the top of the arms between the mounting tabs. i then weld a Grade 8 washer in the new location and drill a hole though the arm

I gained about 7* of caster with this modification and it worked very well

Owner caption · Photo 398 of 406

Is this accurate? Sign in to help verify it.

Comments

No comments yet.

More 1992-1996 Broncos