_Spring.and_snu1.mugImnsverseiink.Assembly {SSEMB LY When installing upper and lower end of coil spring on strut, it must be located and oriented as shown below. / UDDel and s=A502 REMOVAL 1. Remove drive shaft. Refer to Front Axle. 2. Remove lower ball HT72520000 (J25730-Al. joint using Tool lNSPECTlON - Check ball joint for play. if ball stud is worn and play in axial direction IS excessive or joint is hard to swing, replace transverse link assem- bly. C 47. Turning torque: "A" 0.15 3.43 N-m (1.5 - 35 kg-cm, 1.3 - 30.4 in-lb) "B" 0.15 ~ 3.43 N-m (1.5 - 35 kg-cm,1.3 - 30.4 in-lbl Axial play: "c" 0.5 mm (0.020 in) 0 Check condition of dust cover, If it is cracked excessively, replace transverse link assembly. 0 Check rubber bushing for damage, cracks and deformation; replace transverse link if neces- sary, I Check transverse link for damage, cracks, deformation; replace transverse link if neces- sary. FA-12