Home/
Registry/
Ford/
Bronco/
1966-1977/
1974 Ford Bronco/
Photo
supermotors.net/registry/media/306910
1973 Ford Bronco Manual Page 25 - Hood Opening, Fuel Tank Capacity & Octane
Owner's manual page covering hood opening steps, fuel tank refill capacities and recommended gasoline octane.
This is page 25 of a 1973 Ford Bronco owner's manual, covering the end of the 'Comfort and Convenience' section and the beginning of 'Routine Service.' It advises coating the floor side of each washer with a waterproof sealer such as Ford caulking cord (Part No. AB-19560-A) before installation to prevent exhaust fume intrusion. A four-step illustrated procedure explains how to open the hood: pull the hood release lever to unlatch, press up on the auxiliary catch and open the hood, lift the support rod from its clamp, then raise the hood and position the support rod in its hole. The Routine Service section lists fuel tank refill capacities: the main tank holds 12.20 U.S. gallons (10.25 Imperial gallons) and the optional auxiliary tank holds 7.5 U.S. gallons (6.25 Imperial gallons). A 'Gasoline Octane' paragraph states that all 1973 engines are designed to run on regular gasoline with a research octane rating of at least 91 when the engine is adjusted to factory specifications, and explains the station pump symbol system: where a numbered symbol is used, gasoline should be rated at least #2 (illustrated by a circular gasoline symbol with the numeral 2).
Is this accurate? Sign in to help verify it.
Frequently asked questions
- How do you open the hood on a 1973 Ford Bronco?
- Pull out the hood release lever to unlatch the hood, press up on the auxiliary catch and open the hood, lift the support rod from its clamp, then raise the hood and position the support rod in the hole.
- What is the fuel tank capacity of a 1973 Ford Bronco?
- The main tank holds 12.20 U.S. gallons (10.25 Imperial gallons); the optional auxiliary tank holds 7.5 U.S. gallons (6.25 Imperial gallons).
- What octane gasoline does a 1973 Bronco require?
- All 1973 engines are designed to operate on 'regular' gasoline with a research octane rating of at least 91 when the engine is adjusted to factory recommended specifications. Where the pump symbol method is used, gasoline should be rated at least #2.
- What sealer does Ford recommend when installing the washers to keep out exhaust fumes?
- The floor side of each washer should be coated before installation with a waterproof sealer such as Ford caulking cord, Part No. AB-19560-A.
No comments yet.