Pre-TFI ICM CCD upgrade.

V8 engine lifter valley with roller lifters installed, intake manifold removed Roller lifters with link bar guide seated in an aluminum engine block lifter valley Link-bar roller lifter pair seated in the lifter bores of a bare engine block Engine block deck with four cylinder bores and head gasket, head removed Ported twin-bore aluminum throttle body on a workbench showing machined bores Close-up inside a ported aluminum throttle body bore showing blended casting Close-up down a ported throttle body bore showing polished lip and cast passage Bagged Comp Cams 7972-1 pushrods with part number and barcode Threaded rocker stud with valve locks and a threaded slug on a red shop rag Hand holding a double-ended hex-collar stud with damaged threads Three double-ended threaded studs with hex center flats on red cloth Eight used rocker arm studs arranged in a row on red cloth Comp Cams bag labeled 7972-1 Hi-Tech 5/16 standard pushrod on a plywood workbench 1990 Ford Bronco photo Hand holding a double-ended hex stud with damaged threads over red cloth Three double-ended hex-collar exhaust studs laid out on a red shop rag 151photos in this albumView all