Put the backing plate back on. Make sure you have the caliper po…

Put the backing plate back on. Make sure you have the caliper position right before tightening up the spindle nuts. The spindle nuts should be tightened to 35-40 lbs. Before tightening them all, you might want to try putting the caliper in place and find out how much you need to grind off the knuckle so it will fit.

In order to put the caliper on i had to grind this down a good amound. caliper needs to be able to slide freely witout hitting this

Owner caption August 2012 · Photo 40 of 378