File 262 of 462
Prev | Next

Share This
Url
Tag
Img
Thumb

cruise-servo-93up.jpg Cruise Servo 1993-03 (7.5L F450 shown; others similar)

[url=http://www.supermotors.net/vehicles/registry/media/148976][img]http://www.supermotors.net/getfile/148976/thumbnail/5.8l-spout.jpg[/img][/url] . [url=http://www.supermotors.net/registry/15812/53817-4][img]http://www.supermotors.net/getfile/463297/thumbnail/modules.jpg[/img][/url]

Cable Adjustment
1. Remove cable retaining clip (9D726) from actuator cable at accelerator shaft bracket (9728 ).
2. Set throttle plate to closed position.
3. Pull on the actuator cable (away from the clip, toward the servo) to take up any slack. Back off at least one notch so that there is 1mm (.040 inch) of slack in the cable. The cable must not be pulled tight for proper operation.
4. While holding the cable, insert the retaining clip and snap securely.

[url=http://www.supermotors.net/registry/media/177061][img]http://www.supermotors.net/getfile/177061/thumbnail/cruisediagnosticselectronic.jpg[/img][/url] . [url=http://www.supermotors.net/registry/media/669399][img]http://www.supermotors.net/getfile/669399/thumbnail/servo96.jpg[/img][/url]
cruise-servo-93up.jpg | Hits: 11871 | Posted on: 9/10/05 | View original size (188.94 KB)

Cruise Servo 1993-03 (7.5L F450 shown; others similar)

.

Cable Adjustment
1. Remove cable retaining clip (9D726) from actuator cable at accelerator shaft bracket (9728 ).
2. Set throttle plate to closed position.
3. Pull on the actuator cable (away from the clip, toward the servo) to take up any slack. Back off at least one notch so that there is 1mm (.040 inch) of slack in the cable. The cable must not be pulled tight for proper operation.
4. While holding the cable, insert the retaining clip and snap securely.

.
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog