INTERIOR AND EXTERIOR Exterior - Apply sealing compound where necessary while installing parts. a When applying sealing compound, be careful that the sealing compound does not protrude from parts. QQQQQQQ SEFZBOD I Back door window molding Method 2 Method 1' 1. Cut off sealant at baek door glass and. Cut of! ma ponicm ofmolding 2. Clean the suite on whlch panel was mounted. and clean glass and aanel Moldmg surfaces, 1 Iv Apply sealant to ma purrlan oi molding, 3. Install molding by aligning the molding mark located on center with vehicle centerl 42 : Be sure to install tightly so that there is no gap g}. #J around the corner. Cm all lower aumon of new 4. Install molding joint. moldlng. A _ 2 3 Windshield and side window weatherstrip - Finlsn well to glue H a good all, Windshigld wenthusu-ip Side window Weatherstrip A gamma" : Apply sualanr after clealng bundlng r Annlv sualam amr . surface cleaning bondlnq Windllllem Q swim Install muldlng joint Twamsmp