SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
1990 Ford Bronco
Home/ Registry/ Ford/ Bronco/ 1987–1991/ 1990 Bronco supermotors.net/registry/17550

1990 Ford Bronco

31 photos documented since 2007 2 years documented ♡ Follow this build

Photos

1990 Ford Bronco - Bringing home the latest addition 1990 Ford Bronco - Two Ford Broncos are visible, one loaded onto a trailer and another parked nearby. 1990 Ford Bronco - After only 10,000 miles, this roller cam conversion 'spider' didn't make it. 1990 Ford Bronco - This allowed the rollers to spin in its bore - you can see the build up of metal on the side of the roller. 1990 Ford Bronco - This also gouged the lobes on the cam. 1990 Ford Bronco - This is the 3rd dist gear that got chewed up - lesson here: use a steel gear with a roller cam no matter what the cam manufacturer says. 1990 Ford Bronco - The gear on the cam is worn as well. 1990 Ford Bronco - This is what happens when you don't use hardened pushrods with guideplates. 1990 Ford Bronco - Almost done - new cam, lifters, pushrods. 1990 Ford Bronco - Engine block with rocker arms and valve springs visible, part number W-301-MC 08. 1990 Ford Bronco - A Ford Racing V8 engine is displayed on a stand, blue paint and chrome accents. 1990 Ford Bronco - A blue V8 engine with chrome valve covers is displayed on an orange stand. 1990 Ford Bronco - Going back in the truck. 1990 Ford Bronco - Here's my aluminum trans pan 1990 Ford Bronco - Undercarriage view shows suspension and exhaust system components of a vehicle parked on asphalt. 1990 Ford Bronco - Here's a comparison of my new EMP Stewart pump and my old pump. You can see now why they claim 30% more flow. 1990 Ford Bronco - Here's the backing plate that came with the pump - the wrong one for my Bronco. Good thing I noticed!!! The top of the driver's side inlet… 1990 Ford Bronco - Here's my old plate - not a perfect fit, but better. 1990 Ford Bronco - Left - the backing plate that came on the pump. Right - the alternate plate I found later in the bottom of the box. 1990 Ford Bronco - The 2 back plates overlaid so the holes line up. 1990 Ford Bronco - The top one reversed so the inlet holes line up (not really). Now the bolt holes will not line up either. There is only one way to mount th… 1990 Ford Bronco 1990 Ford Bronco 1990 Ford Bronco 1990 Ford Bronco 1990 Ford Bronco 1990 Ford Bronco 1990 Ford Bronco 1990 Ford Bronco 1990 Ford Bronco
Browse all 31 photos

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.