Manual Pages: Ford Bronco 1987-1991

Technical Reference

Member-uploaded diagrams & documents for this generation. AI-classified; community-verified where badged.

Manual Pages

• Ford 5.0L/5.8L Air Throttle Body Assembly Diagram - Canister Purge Ports & TPS
  This is a scanned page from a Ford service/reference manual describing the air throttle body assembly used on 5.0L and 5.8L EFI engines. The text lists three additional features of the assembly: a preset stop to locate…
• Ford 5.0L/5.8L EFI Air Throttle Body Assembly Diagram - TPS & Air Bypass Valve
  This manual page describes and illustrates the air throttle body assembly used on Ford 5.0L and 5.8L EFI engines. The text lists three additional features of the assembly: a preset stop that locates the wide-open…
• Cover of the Ford Engine/Emissions-Diagnosis 1990 Shop Manual.
• Camshaft chart for Ford 351W 1969-91 and 221-302 CI 1962-91 V8s listing MC1775, MC4225, MC4120, MC2311 and more with duration, lift and power range.
• Section 31-5 speed control troubleshooting table covering switch resistance at wire 151 (LB/BK), servo linkage and modulating valve checks at connector C217.
• Parts table listing 11666 headlamp switch knob, 044D70 cluster finish panel, 046A62 lower instrument panel moulding and the instrument panel.
• Ford Racing mass air conversion kit chart: M-9000-A51 and B50 for 1986-88 Mustang 5.0L HO, T50 and T51 for 1987-93 F-Series 5.0L/5.8L EFI trucks.
• Ford certification label decoder for District Sales Office and wheelbase codes on Bronco, E-Series and F-Series, with district and Ford of Canada region tables.
• 1988 Ford Bronco Build Cost Sheet - "Mr. Hyde the Deuce" Parts & Expense List
  This document is a personal build/expense ledger for a 1988 Ford Bronco nicknamed "Mr. Hyde the Deuce." It itemizes purchases from 5/27/2013 through 7/23/2013, starting with a $2,200 purchase price and totaling $8,530…
• Ford Motor Co. automatic transmission identification page matching pan and gasket shapes to C3, C4, C6, MX, FX/FMX and Borg Warner units by model year.
• 1990 Ford Bronco/F-Series Oil Pressure Gauge Specs & Sender Location 33-32-4
  This is page 33-32-4 from a Ford factory service manual section covering the Oil Pressure Gauge. The page includes two illustrations: FIG. 4 shows a typical oil pressure sender unit location on 8-cylinder F-Series 5.0L…
• 1990 Ford Bronco Instrument Cluster Circuit Operation & Sender Specs (60-7)
  This is page 60-7 of a Ford electrical/vacuum troubleshooting manual (EVTM) covering the Instrument Cluster circuit, uploaded as applying to a 1990 Ford Bronco. The page explains "How the Circuit Works": with the…
• Ford chart dated 8-14-89 of 1990 Bronco axle ratio availability for 4.9L, 5.0L and 5.8L engine/transmission combos in 49-state, California and high altitude.
• Ford 5.8L EFI Deposit Resistant Injector (DRI) Diagram & Description - E4OD
  This scanned manual page describes the Deposit Resistant Injector (DRI) fitted to some vehicles equipped with 5.8L EFI engines and the E4OD transmission. The text explains that the DRI was designed to eliminate the…
• Ford Duraspark II Ignition System Diagram - Component Layout & Wiring (23-01-2)
  This is a scanned page (23-01-2) from a Ford factory service manual section titled 'General Ignition Service.' It contains Figure 1, a labeled pictorial diagram of the Duraspark II Ignition System, showing all major…
• 1990 Ford Bronco Horn & Cigar Lighter Circuit (EVTM 44-2) - Locations & Operation
  This is page 44-2 of a Ford electrical and vacuum troubleshooting manual (EVTM) covering the Horn and Cigar Lighter circuits, uploaded as applying to a 1990 Ford Bronco. The page contains a component location table…
• 1996 Ford F-150/F-250/F-350/Bronco Oil Pressure Gauge & Switch Operation
  This page is from Section 13-01 (Instrument Cluster, Conventional) of the 1996 Ford F-150, F-250, F-350, Bronco, and F-Super Duty Motorhome Chassis Workshop Manual, in the Description and Operation subsection. It…
• Ford towing guide definitions of Gross Axle Weight, GAWR, GVW and GVWR, explaining how to weigh front and rear GAW and where the certification label is.
• Ford towing guide definitions of GCWR, Payload, Base Curb Weight, Maximum Loaded Trailer Weight, Cargo Weight and GCW, noting brakes above 1,500 lbs.
• Dana 60 Monobeam Axle Lower Kingpin Removal Diagram - Ford Two-Jaw Puller
  This document is a single illustrated page (Fig. 106) from a service manual showing the procedure for removing the lower kingpin on a Dana 60 Monobeam front drive axle. The line drawing depicts a two-jaw puller (Ford…
• Dana 60 Monobeam Front Axle Tapered Bushing Removal Diagram - Ford Knuckle
  This document is a single illustrated figure (Fig. 104) from an automotive service manual showing tapered bushing removal for the Dana 60 Monobeam front drive axle. The line drawing depicts a steering knuckle assembly…
• Dana 60 Monobeam Front Axle Lower Kingpin Removal Diagram - Fig. 102
  This is a single scanned illustration (Fig. 102) from an automotive service manual showing lower kingpin removal for the Dana 60 Monobeam front drive axle. The line drawing depicts the steering knuckle from the front…
• Dana 60 Monobeam Front Axle Compression Spring Removal Diagram (Fig. 101)
  This document is a single scanned service-manual illustration (Figure 101) showing compression spring removal for the Dana 60 Monobeam front drive axle. The line drawing depicts an exploded view of the axle's steering…
• Ford shop manual Section 17-02, Shift Control Linkage, covering manual linkage and neutral start switch adjustment plus shift linkage grommet removal.
• Cover of the 1989 Ford Truck Shop Manual Volume B, Light Duty Truck engine, listing cooling, fuel, exhaust, ignition and starting system groups.
• Cover of the 1989 Ford Truck Shop Manual Volume A, Light Duty Truck body/chassis/electrical, with its subject and group index.
• Wheel Alignment Basics Diagram - Camber, Caster & Toe-In Explained (Ford Bronco)
  This is a scanned manual page (figure 22.1, 'Typical alignment details') illustrating the three fundamental front-end wheel alignment angles using labeled diagrams. The first diagram, 'Camber Angle (Front View)', shows…
• Ford Bronco Wheel Alignment Diagram - Camber, Caster & Toe-In Explained
  This is a scanned manual page (figure 22.1, "Typical alignment details") illustrating the three fundamental front-end wheel alignment angles using three labeled diagrams. The first diagram, "Camber Angle (Front View),"…
• Ford Bronco 4WD Owner's Guide Page 3 - How Your 4WD Differs From Other Vehicles
  This is page 3 of a Ford owner's guide/4WD supplement explaining how a four-wheel-drive vehicle differs from conventional passenger vehicles. The page, titled "How Your 4WD Differs From Other Vehicles," lists three key…
• Alignment report page listing initial and final SAI, included angle, toe out on turns, setback, track width and wheel base difference. Store #6235.
• Service kit 9F939 application chart listing 1983-1992 Ford car and light truck EFI engine applications, including Bronco, plus excluded engines.
• 1995 Ford Bronco Component Location Views 151-4 - Behind Instrument Panel
  This is page 151-4 of the 1995 Ford Bronco Electrical and Vacuum Troubleshooting Manual (EVTM), titled "Component Location Views." It presents a detailed line-art illustration of the area behind the instrument panel…
• Ford truck steering assemblies chart listing part numbers 000970 through 000982, from 70-79 full size pickups to 97-04 F150, including a rag joint kit.
• Ford camshaft application table, 1985-1995, for E5ZE-AA, E5AE-AA, E8ZE-CA, F1ZE-AA, F4ZE-DA and F3ZE-CA with lift, duration, overlap and lobe center.
• 1990 order guide page for California emissions and high altitude principal use, with codes 422, 93N, 423, 936, 428 and 429 and their requirements.
• Fuel Injector Spray Patterns Diagram - Annular, Single-Hole & Multi-Hole Metering
  This document is a single illustrated figure from an automotive reference showing four types of fuel injector metering and spray atomization patterns. The caption identifies the four types as: (1) annular orifice…
• Ford truck model codes with gross vehicle weight, F100 at 5,000 lbs to F350 at 10,000 lbs, and body codes 81, 84, 85 for cab and cowl styles.
• Ford EEC SD to MAF Conversion Pin-Out Table Pins 55-60 - Injector, PIP, GND
  This document is a scanned fragment of an EEC computer (ECU) pin-out comparison table, covering connector pins 55 through 60. It appears to be page 3 of a 'Speed Density to MAF' (SD to MAF) conversion pin-out reference…
• Ford Bronco SD to MAF EEC Pin-Out Chart Pins 23-54 - Speed Density Conversion
  This document is one page of a multi-page EEC computer pin-out comparison table, apparently created to support a Speed Density (SD) to Mass Air Flow (MAF) EFI conversion on a Ford truck. The table lists ECU connector…
• Manual page 112-5 for the 1995 Bronco anti-theft system listing connectors C202, C213, C214, C228, C229, C251 and C269 with their cell-page references.
• Ford 4-Speed Automatic Transmission Pan ID Chart - AOD, AODE, E4OD, A4LD
  This document is a transmission identification chart titled "Four-Speed Ford Automatics." It shows the oil pan gasket outlines (pan shapes) of four families of Ford four-speed automatic transmissions, allowing a reader…
• Ford Three-Speed Automatic Transmission Pan Gasket ID Chart - C3 C4 C5 C6 FMX
  This document is a pan gasket identification chart titled "Three-Speed Ford Automatics." It shows the outlines of five different transmission oil pan gaskets, each labeled with the transmission it belongs to, allowing…
• Ford EEC-IV Computer Pin-Out Chart Pins 29-60 - Fuel Injector & Trans Signals
  This document is a continuation page (pins 29 through 60) of a Ford EEC engine computer connector pin-out table, apparently comparing pin assignments across different configurations (the column headers are on a…
• Ford Truck/Van/Bronco 87-95 EEC-IV Computer Pinout Chart - SD & Mass Air
  This document is a reference chart titled "Truck Computer Pin outs" comparing EEC-IV computer (ECU/PCM) connector pin assignments for Ford Truck, Van, and Bronco vehicles with 302/351 engines. It compares four columns…
• Cover of the Ford 1990 Bronco/F150-F350 F-Super Duty Electrical & Vacuum Troubleshooting Manual with a pickup truck illustration.
• Fuel Injector Sizing Formula - HP x BSFC Calculation & lbs/hr to cc/min Convert
  This document is a single-page reference showing the formula for calculating required fuel injector flow rate. The formula shown is: Horsepower multiplied by B.S.F.C (brake specific fuel consumption), divided by the…
• Flow data for stock, unported GT-40P, GT-40, E7TE, '69 351W, 289 and GT-40 (Y303/X303) heads at .100" to .500" lift, 28" H2O.
• Ford GVW & GCW Calculation Diagram - Gross Vehicle & Combination Weight Formula
  This document is a single slide/manual page explaining how to calculate vehicle towing-related weights for a Ford truck. It presents two formulas: (1) Base Curb Weight + Cargo Weight + Passenger Weight + Tongue Load or…
• Unauthorized Items List - Explosives, Flammables & 'Explosive Auto Alarms' WTF
  This document is a photographed page titled "Unauthorized Items", a prohibited/hazardous items list, not a vehicle service manual page. It is organized into four categories: Combustible Liquids (e.g., alcohols…
• Ford shop manual Section 16-81, Borg-Warner 13-56 Transfer Case, Manual Shift, with description, cutaway views and transfer case removal steps.
• Ford Bronco EGR Valve Position (EVP) Sensor Connector Pinout Diagram
  This scanned manual page shows a connector pinout diagram for a Ford EGR Valve Position (EVP) Sensor, uploaded to the gallery of a 1991 Ford Bronco. The illustration depicts the face of the three-pin sensor connector…
• Ford Bronco Manual Page Scan - Illustration with Callouts (Blurry, Unreadable)
  This is a photograph of an open printed manual or reference book page, uploaded as documentation for a 1988 Ford Bronco. The photo is severely out of focus, and no text on the page can be read. The visible layout…
• KOEO throttle position sensor voltages by make: Ford 0.7-1.1 Volts closed, 4.6 Volts WOT, plus GM, Chrysler, Jeep, Honda/Acura, Nissan, Toyota and Volvo.