Data & Spec Plates — Ford Bronco 1987-1991
Technical Reference
Member-uploaded diagrams & documents for this generation. AI-classified; community-verified where badged.
Data/Spec Plates
- Stamped metal equipment data plate showing serial and stock numbers with voltage, amperage, KW, phase and hertz electrical ratings.
- Equipment data plate titled Power Stacker Specifications listing model PWS-2024-1517, serial, voltage, amp/hr and load capacity.
- Ford engine calibration identification sticker showing calibration code 9-64E-R11 and part number E9AE-6E061-CCT.
- Ford vehicle certification door plate listing VIN, GVWR/GAWR, tire and pressure specs, and paint/axle codes.
- Ford Motor Co. door certification/data plate listing GVWR, GAWR, VIN and paint codes
- Ford Motor Co. door certification/data plate listing GVWR, GAWR, VIN and paint codes
- Holmes Hobbies HV500 servo retail-case spec label: 6.0-8.4V, dead band 2us, up to 500 oz-in stall torque at 8.4V, 0.11s/60deg speed, 41x20x40mm, 73g.
- Virtual Dyno torque/power/AFR/boost chart from CSV logs: about 332 hp at 5447 rpm and 351 lb-ft at 4290 rpm with peak boost around 13 psi.
- Riveted metal data/instruction plates showing the gear shift pattern and Russian-language drivetrain control labels.
- Virtual Dyno chart plotting torque, power, air/fuel, and boost vs engine RPM: ~335 HP at 4734 rpm and ~413 lb-ft at 3625 rpm.
- California Smog Check report showing vehicle failed as a gross polluter; ASM emission results list HC, CO, NO measured vs max at 15 and 25 mph, ignition timing 10 BTDC.