KIMG0034.JPG
129 hits | 61.31 KB | Posted: 12/13/17
These are a set of unbranded aluminum bare cylinder heads i got on ebay. They were said to have part...

KIMG0031.JPG
102 hits | 57.43 KB | Posted: 12/13/17
these are the only markings on the heads. seems to be the date of manufacture and another code of so...

KIMG0032.JPG
89 hits | 70.44 KB | Posted: 12/13/17
exhaust port castings

KIMG0033.JPG
98 hits | 68.84 KB | Posted: 12/13/17
intake port castings

KIMG0061.JPG
88 hits | 76.74 KB | Posted: 1/6/18
engine block is a standard 351w non-roller i bought from a friend. it was previously rebuilt by a co...

KIMG0062.JPG
91 hits | 77.3 KB | Posted: 1/6/18
the camshaft is a Comp Cams 35-421-8 small base retrofit roller cam. i did not want to buy a set of ...

KIMG0063.JPG
80 hits | 73.36 KB | Posted: 1/6/18

72735823_407320726619198_6802289012070416384_n.jpg
80 hits | 28.67 KB | Posted: 10/30/19
so after 2 events running this engine and getting ready for the next, i started to head a bit of a k...

KIMG0071.JPG
79 hits | 80.39 KB | Posted: 10/30/19
my suspicion of a spun bearing was correct. they were toast. luckilly i caught it in time it appears...

72807734_2712796268772058_1853047460717395968_o.jpg
111 hits | 60.92 KB | Posted: 10/30/19
new reman crankshaft is from Crankshaft Supply and bought from Rockauto. it was ground with i believ...

KIMG0073.JPG
112 hits | 41.22 KB | Posted: 10/30/19
i went with a Melling 10833 oil pump. it is thier race version of high volume oil pump. which suppor...

71716188_560426738061349_4059191394089041920_n.jpg
136 hits | 43.04 KB | Posted: 10/30/19
got the engine back in.

i replaced the old roller rockers with some Miller Mid-Lift 1.6 rockers. t...