SuperMotors SuperMotors SUPERMOTORS Search: try “orange Bronco on 35s”
Join
Home/ Registry/ Ford/ Bronco/ 1992-1996/ “1995 Bronco”/ SAS supermotors.net/registry/3665/72637

Album section

SAS

From 1995 Ford Bronco “1995 Bronco”, documented by Mike Lipford.

46 photos
← Back to this vehicle
1995 Ford Bronco - Suspension and driveline parts laid out on a garage floor: two driveshafts, four white shock absorbers, an electric winch with steel cable,… 1995 Ford Bronco - Bronco on blocks ready to pull stock front and rear axles out. 1995 Ford Bronco - American Eagle 589's 15x10 5 on 5.5 lug with Procomp Mud Terrains 35's 1995 Ford Bronco - A dark green Ford Bronco is elevated on jack stands in a garage, with its wheels off for maintenance. 1995 Ford Bronco - Rear axle assembly, likely from a truck or SUV, is shown mounted on a wheeled wooden stand. 1995 Ford Bronco - Rear axle assembly for a Ford Bronco, likely undergoing repair or modification. 1995 Ford Bronco - Two steering tie rods, one with a worn metal finish and the other painted gray, are laid out on a concrete floor. 1995 Ford Bronco - Two steering linkage bars with blue ends are laid out on a concrete floor. 1995 Ford Bronco - Four Bilstein shock absorbers are displayed on a concrete surface, alongside a detached metal bracket. 1995 Ford Bronco - Close-up of a Bilstein shock absorber, part number F4-BF5-A198-H1, from the 5150 Series. 1995 Ford Bronco - Dimensioned AutoCAD blueprint of a bracket profile showing hole diameters and overall measurements. 1995 Ford Bronco - Dimensioned AutoCAD blueprint of a rectangular plate showing length, height and hole spacing measurements. 1995 Ford Bronco - Dimensioned AutoCAD blueprint of a mounting plate showing a hole pattern with diameters and edge dimensions. 1995 Ford Bronco - Dimensioned AutoCAD blueprint of a rectangular plate showing overall length, height and hole locations. 1995 Ford Bronco - Metal bracket labeled CAGE, likely a custom automotive part. 1995 Ford Bronco - A metal plate with multiple holes and the word CAGE is shown against a textured background. 1995 Ford Bronco - A metal bracket is shown with a hand and a tape measure in the background. 1995 Ford Bronco - A metal bracket with several drilled holes and a prominent circular opening is shown, with a portion of jeans visible at the bottom. 1995 Ford Bronco - A dark green 1995 Ford Bronco with tan trim is shown with its suspension lifted and resting on blocks. 1995 Ford Bronco - Close-up of a yellow Johnson Magnetic Angle Locator No. 700 held against a driveline component under a vehicle, its red needle reading roug… 1995 Ford Bronco - Close-up of a front suspension corner in a garage, with a translucent orange Daystar polyurethane bump stop or spacer held against the coil… 1995 Ford Bronco - This image shows a close-up view of a welded metal frame, likely a component of a vehicle's chassis. 1995 Ford Bronco - A fabricated metal bracket with a diamond plate foot is shown on a concrete surface. 1995 Ford Bronco - A custom-fabricated metal bracket, a diamond plate surface, rests on a concrete floor. 1995 Ford Bronco - Welded metal bracket detail. 1995 Ford Bronco - A black diamond plate metal bracket is shown, mounted on a sawhorse in a workshop setting. 1995 Ford Bronco - A black metal bracket, likely a vehicle part, is shown resting on sawhorses. 1995 Ford Bronco - This lifted Ford Bronco appears to be from the early to mid-1990s, not a 1995 model. 1995 Ford Bronco - Close-up of welded metal brackets attached to a pipe. 1995 Ford Bronco - The Bronco's suspension system, including a lifted coil spring and shock, is visible in this close-up shot. 1995 Ford Bronco - Close-up view of the suspension system in a 1995 Ford Bronco, showing the coil spring and shock absorber. 1995 Ford Bronco - Close-up of the rear suspension system on a 1995 Ford Bronco, highlighting the shocks and coil spring assembly. 1995 Ford Bronco - Front suspension components including a coil spring and shock absorber are visible near the tire. 1995 Ford Bronco - Templates for fabrication are laid out on a workbench surface. 1995 Ford Bronco - A metal pipe lies on a tire next to a drill press in a workshop setting. 1995 Ford Bronco - A metal pipe lies across a large tire, with a white cloth draped over the tire. 1995 Ford Bronco - Close-up of a vehicle axle part and tire tread. 1995 Ford Bronco - Custom bracket installed on the vehicle's frame, near a Bilstein shock absorber. 1995 Ford Bronco - A metal bar with mounting hardware is shown on a wooden surface, with a portion of a dark green and tan vehicle visible in the background. 1995 Ford Bronco - A metal rod with mounting plates and prongs is shown on a wooden surface, possibly a vehicle part. 1995 Ford Bronco - Post SAS All cleaned up and ready to go. 1995 Ford Bronco - The vehicle's interior shows a dark dashboard with a lit screen displaying red and white text. 1995 Ford Bronco - Close-up view of a vehicle's undercarriage, focusing on the driveshaft and exhaust system. 1995 Ford Bronco - Underside view of vehicle drivetrain components, showing the differential and driveshaft connection. 1995 Ford Bronco - Schematic showing pinion flange and drive shaft angles to evaluate driveline operating angle. 1995 Ford Bronco - Driveshaft and differential assembly shown from underneath a vehicle.