'80-96 Wiper Valance
IF THE IMAGE IS TOO SMALL, click it.
022A08 is only used from '87-97
020A50 is only used on the R (passenger) side '80-95; '96-97 on both sides
022A56 Wiper Valance (Cowl Grill) ('92-96 F6TZ15022A68AA)
E7TZ1502824A cowl-to-hood seal
LMC part 41-1514 may be the best replacement, for ~$30. Common replacements as on
Amazon & eBay are not made properly, and may require cutting to fit.
Removal:
1) lift the wiper arms, slide out the catches, then pull the arms off the shafts
2) lift the antenna base trim, remove 4 screws, unplug antenna cable from base
3) remove screws from valance near w/s lower moulding
4) open hood & remove screws along front of valance
5) work valance forward & up off wiper shafts, then rearward & up from hood
IT MAY BE NECESSARY TO REMOVE THE LOWER & SIDE W/S MOULDINGS. It may also be necessary to adjust the hood forward on the hinges, and re-align it to the body later.
6) disconnect sprayer hose and remove valance from truck
.
.
.
.
.
.
.
.
