What cutout size is needed for the Blue Sea Systems single Contura switch mounting panel?

The template shows a rectangular cutout of 1.900" (48.20 mm) by 0.984" (25.0 mm).

What part number is shown on this Blue Sea Systems template?

The number 8268 is visible in the corner of the card (a further digit may be cut off at the edge).

What does the template instruct the installer to do?

It instructs to 'Test Cut Hole in Actual Material' — i.e., make a test cut using the given dimensions in the actual mounting material.

Home/ Registry/ Ford/ F-550/ “F53 16K Fleetwood Flair”/ Photo supermotors.net/registry/media/1169742

Blue Sea Systems 8268 Contura Switch Single Mounting Panel Cutout Template

Switch single mounting panel template with dimensioned cutout drawing in inches and millimeters

‹ ›

Dimensioned mounting-panel template showing a 1.900 by 0.984 inch test-cut cutout for a switch

AI caption June 2022 · Photo 1255 of 1514

This document is a printed mounting-hole template card packaged with a Blue Sea Systems Contura Switch Single Mounting Panel (part number visible as 8268, possibly with a truncated digit). The card provides the required panel cutout dimensions for installing the single Contura-style rocker switch mounting panel: a rectangular hole measuring 1.900 inches (48.20 mm) tall by 0.984 inches (25.0 mm) wide. The rectangle on the card is labeled 'Test Cut Hole in Actual Material,' indicating the installer should cut a test hole using the template dimensions before final installation. A second, mostly hidden card behind it shows partial text ('Co...' / 'Sing...'), likely a duplicate or related mounting panel insert. This is not a vehicle-specific document; it is a universal marine/automotive electrical accessory installation template. A reader can learn the exact cutout size needed to flush-mount the Blue Sea Systems single Contura switch mounting panel in a dash or panel surface. No wiring information, amperage ratings, or vehicle applicability data appear on this document.

Is this accurate? Sign in to help verify it.

Frequently asked questions

What cutout size is needed for the Blue Sea Systems single Contura switch mounting panel?: The template shows a rectangular cutout of 1.900" (48.20 mm) by 0.984" (25.0 mm).
What part number is shown on this Blue Sea Systems template?: The number 8268 is visible in the corner of the card (a further digit may be cut off at the edge).
What does the template instruct the installer to do?: It instructs to 'Test Cut Hole in Actual Material' — i.e., make a test cut using the given dimensions in the actual mounting material.
Is this document specific to a particular vehicle?: No. It is a universal mounting template for a Blue Sea Systems Contura switch single mounting panel and lists no vehicle years, makes, or models.

Comments

No comments yet.

More from this build

Atwood Mobile Products metal rating plate with serial number, model CV-35BPH and BTU specs

Overhead view of a disassembled gas stovetop with burners, gas lines, and wiring visible.

RV towing a sedan at night in a parking lot with a hotel in the background.

Class A RV towing a silver sedan on a trailer at night.

Backup camera view of a silver sedan in a parking lot with red cars behind it.

Aerial view of a hotel and large parking lot with motorhomes, box trucks, and cars

Rear view of a black Fleetwood Flair motorhome towing a silver sedan on a highway.

Plumbing system with water pump, faucet, and filter

All 1594 photos of this build

More Ford F-550s

1995 Ford F-550 “tims tile”2 photos

The Ford F-550 registry