This document details engine maintenance procedures, including oil capacity and spark plug replacement steps.
ENGINE , MAINTENANCE Before Engine Starts (Cont'd) a 9. Refill engine with the appropriate new engine oil by referring to Recommended Lubricants. Check all level with dipstick. Oil capacity (Refill): With oil filter 2.8 liters (3 US qt, 2-1/2 Imp qt) Without oil filter 2.6 liters (2-3/4 US qt, 2-1/4 Imp qt) SMAEOdA 10. Install oil filler cap and start engine. 11. Check area around drain plug and oil filter for any sign of oil leakage. If leakage is evident, retighten or replace 12. Run engine until water temperature indicator points to middle of gauge. Then tum'off engine and wait several minutes. Check oil level with oil level gauge, If necessary, add engine oil. When checking oil level, park car on a levelrsurface. will ml to "H" men. Do not nvarfill, sMAsnsA REPLACING SPARK PLUG 1. Disconnect hightension cables at boot. Do not pull on the wires. SMA037A 2. Remove spark plugs with spark plug wrench. SMAsagA 3. Inspect new spark plugs for cracks or damage. 4. Check new spark plug gap. Slda electrode Gan: 0.3419 mm (0.031 - 0.015 in)
No comments yet.