REASSEMBLY 14. Install both reverse bracket assembly and guide plate. a Gold: pm: sMreaa 15. Install transmission case, 16. Install position switch. SMTQJ 1 17. install shift check, reverse check and 5th check component parts. Apply sealant to threads of plugs. 5'ipm only suites: 18. Shift gear position to 4th. Measure distance "t between transmission case and strlking interlock, then select suitable plunger Reverse check plunger: Refer to 8.0.8. Striking interlock A lNeutrzl posmcnl ~T'3nimlssill case 19. After assembly, check that you can shift into each gear smoothly. 20. Measure total turning torque. " 7KV33IUEIOD SMreaA Total turning torque (New bearing): 2.5 ~ 5.9 N-m (25 - 60 kgcm. 22 ~ 52 in-Ib) When old bearing is used again, preload will be slightly lower than that indicated above. Check preload to see if it is not far from specified range.