Surlng relalner Pmon seai e 093 NE? 5mm Fisxnn Highvreverse ciutch (From) drum DiSASSEMBLV o Compress clutch springs and remove snap ring from spring rexainer. sATaia Q wmm; may 1mg Drive pine - Snap ring ,Md- SArala o For easy removal of piston from drum, use an air gun with a tapered rubber tip to carefully apply air pressine to loosen piston from drum. SAT315 INSPECTION AND ASSEMBLY 1, Check clutch drive plate facing for wear or damage. Drive plate thickness must not be less than 1.6 mm (0.063 in). Standard drive plate thickness: 1.70 - 1.85 mm (0.0669 ~0.0728 in) .s 2. Check for wear on snap ring, weak or broken coil springs, and warped spring retainer. .4 AT-29