6, Insert Tool KV38105900 all the way into diff. side gear. Move Tool up and down and measure dial gauge deflection H". ' KVSBIOSOUOUSZZOOI 38105900 33201 ) sAusA Select shim with appropriate thickness, using $.D.S, as a guide, Available shims: Reler to 5.0.3. Disassemble transaxle and insert shim, then re- assemble again. Measure diff. side bearing preload with Tool KV38105900. Type B.(Cont',d) ~ KVSSIDSQDO (3201) SATBSS Specified diff. side bearing preload: 2,9 - 4.4 N-m (30 - 45 kg-cm, 26 - 39 in-lb) Turn final drive assembly at least 10 eimes before measuring diff. side bearing preload. Changes in diff. side bearing preload per revolu- on should be within 1.0 N-rn (10 kgcm, 8.7 in-lb) without binding. If any abnormalities are noted in b. above, or cliff. side bearing preload is outside the speci- fied range, disassemble and reassemble again. AT43