l0. lnstall shell & sun gear assembly, thrust needle bearing and bearing race. SAT275 : 11. Install low and reverse brake driven & drive plates and retaining plate, then secure with snap ring, SAT274 12. After low and reverse brake has been complete ly assembled, measure clearance between snap p, ring and retainer plate. If measurement exceeds specifications, it can be adjusted by replacing retainer plate with one of a different thickness Low and reverse brake clearance: Standard 1.90 - 2.20 mm (0.0748 - 0.0866 in) Allowable limit 3.8 mm (0.150 in) sArsas Available retainer plate Thickness mm (in) Part Number 36 (0.142l 31667A01X00 3.8 (0,150) 3166701X01 4.0 l0.157) 31667~01X02 4.2 [0165) 31667~01X03 4.4 (0.173) 31567-01X04 13. Install bearing race on connecting shelli 14. Install one-way clutch assembly to rear carrier. SAT39O 15. Install thrust washer on rear carrier. AT-47