File 29 of 161
Prev | Next

Share This
Url
Tag
Img
Thumb


glass.jpg | Hits: 14297 | Posted on: 7/14/03 | View Low-Res

The L latch must be fully closed to defeat the safety interlock switch so the motor will run, so if neither switch works, try hitting the L side of the t/g with your shoulder to fully close the latch.

If the window can't be moved by either switch, find the motor connector shown on the drill chuck and apply 12V power to the 2 exposed wires to operate the motor. Reversing the wires reverses the motor direction. Position the glass so that the track nuts are just above the lower edge of the opening. This glass is too high.

If the tailgate is closed, reach behind the center divider and pull the operating rod down to enable the latch, and open the tailgate. (See later pics.)
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog