Hand-Dimensioned Metal Bar Profile Sketch - 7 3/4" & 5 1/4" Taper, 1/2" Height

This image is not a printed reference document but a photograph of a flat metal bar or strip laid on a white background, annotated by hand in blue ink to serve as a dimensioned sketch (site-classified as a blueprint). The annotations establish orientation and key dimensions: an arrow labeled 'TOP' points upward at the left edge, and an arrow labeled 'FRONT' points to the right, indicating the tapered/beveled end of the bar is the front. Two horizontal dimensions are marked near the front taper: 7 3/4 inches and 5 1/4 inches, apparently indicating where the taper or bevel begins relative to the front tip along two reference lines. A vertical dimension of 1/2 inch is marked at the left (rear) end, likely the height/thickness of the drawn profile at that point. A thin outline traced above the metal piece shows the intended or measured profile, including the sloped transition toward the front end. The image appears intended to document the shape and dimensions of this part, possibly a spring, blade, or bracket component, for fabrication or replacement reference. No part numbers, vehicle model, year, or manufacturer information is visible anywhere in the image.