$109 betweenthe rocker arm and the valve stemti r. late clearance IS 2.5-5.0mm (0098-0198 in.) with apdest , clearance of 3.1-4.4mm (O.123-0.173 in.) 3. if the clearance is less than specified, install a shorter pushrod. If the clearance is greater than specified, install a longer pushrod. , v. 4. Rotate the crankshaft clockwise viewed from the front 180 degrees, until the next chalk mark is aligned with the timing pointer. Repeat the procedure for: o No.- 3 intake w No. 2 exhaust o No. 7 intake . No. 6 exhaust 5. Rotate the crankshaft to the next chalk mark - 90 degrees - and repeat the procedure for: a No. 2 intake , " * No. 4 exhaust " .- No. 5 intake and exhaust -0 No. 6 intake * No. 8 exhaust ' s." g r f ,