SuperMotors SuperMotors SUPERMOTORS Search — try “orange Bronco on 35s”
Join
White Ford pickup with camper shell, side view, parked on residential street
Home/ Registry/ Ford/ F-250/ 1973–1979/ “Big Ed” supermotors.net/registry/1812

“Big Ed”1977 Ford F-250

documented by Tom Cherry AKA Hawkrod 31 photos documented since 11 years documented ♡ Follow this build

Photos

1977 Ford F-250 — Big Ed sitting pretty! the truck is not actually lifted but has the look due to the tall tires. they didn't c… 1977 Ford F-250 — Big Ed's New shoes! i have finally acquired 5 of these original ford camper special 9.75 X 16.5 rims and a se… 1977 Ford F-250 — big Ed gets bigger! here is the new frame and cab i just bought. the frame came from a truck in a wrecker in… 1977 Ford F-250 — no rust here! this is an original paint Ca truck. starting with good parts makes life so easy! 1977 Ford F-250 — floors! good clean paint under all the mats! no patches or repairs needed! 1977 Ford F-250 — no patches or repairs needed! 1977 Ford F-250 — no patches or repairs needed! 1977 Ford F-250 — no patches or repairs needed! 1977 Ford F-250 — Here is the stock 86 F150 power window wiring I used after I drilled the door and cowl. it fit very well but… 1977 Ford F-250 — Here is another shot of the 86 F150 wiring. it actually fit very nicely and looks original. 1977 Ford F-250 — The stock regulator still installed. 1977 Ford F-250 — Here is the stock regulator next to the 86 F150 regulator. Originally, I was going to shorten the newer regul… 1977 Ford F-250 — Here is a side view of the rollers. I am not sure if you can tell but I have already modified the one on the… 1977 Ford F-250 — Here are the clips I used to mount the regulator. I put 4 of these on each regulator. I did not use the top r… 1977 Ford F-250 — Here is the clip installed. It works better if you enlarge the holes slightly so the clips lock in properly. 1977 Ford F-250 — Here is the regulator mounted. You can see the 4 bolts. I had to use .220 thick spacers between three of the… 1977 Ford F-250 — Here is a shot inside the door looking up. You can see the washers and there is plenty of room around the reg… 1977 Ford F-250 — i have now verified what will and will not work. bucket seat brackets from a 65-72 ford pickup will bolt into… 1977 Ford F-250 — here is the drivers side brackets after i bolted them in. 1977 Ford F-250 — here is the drivers seat ready to ride! 1977 Ford F-250 — here is the passenger side bracket bolted down. 1977 Ford F-250 — here is the passenger seat flipped up for easy access to the back seat. 1977 Ford F-250 — This is the front crossmember on a 77 1/2-79 F250. These had a revised frame from the earlier 77 and older F2… 1977 Ford F-250 — This shows how little room there is next to the harmonic balancer in these later frames. 1977 Ford F-250 — Here is how close the power steering is to the steering box. I have a custom bracket that moves the power ste… 1977 Ford F-250 — The roller turned out to be the only modification I needed to make. The square roller is an odd one in my min… 1977 Ford F-250 — Custom built truck tilt column. This was made to use in a 77 and older so you would not have to use the big c… 1977 Ford F-250 — Custom built truck tilt column. This was made to use in a 77 and older so you would not have to use the big c… 1977 Ford F-250 — Custom built truck tilt column. This was made to use in a 77 and older so you would not have to use the big c… 1977 Ford F-250 — Custom built truck tilt column. This was made to use in a 77 and older so you would not have to use the big c… Side view of a 1977 Ford F-250 pickup truck with a camper shell
See every Ford F-250 in the registry The 1973–1979 Ford F-250 registry

The peanut gallery

No comments yet — be the first to add to the record.

Spotted in the wild

Seen this vehicle at a show or on the trail? Add your shot — the owner approves it onto the record.