FUEL SYSTEM WARNING: When replacing iuel line parts, be sure to observe the following: 3. Put a "CAUTION: INFLAMMABLE" sign in workshop with a CO, fire extinguisher. 11. Be sure to furnish the owrkshop with a CO2 fire extinguisher. 1:. Be sure to disconnect battery ground cable before conducting operations. d. Put drained fuel in an explosionproof container and put on lid securely. a. Do not disconnect any fuel line unless absolutely necessary. b. Plug hose and pipe openings to prevent entry of dust or dirt. c. Always replace Oring and clamps with new ones. - d. Do not kink or twist hose and tube when they are installed. e. Do not tighten hose clamps excessively to avoid damaging hoses. 7. When installing fuel check valve, be carefull of its designated direction (Refer to section EC). 9. Run the engine and check for leaks at connections. ll ~43 V (0.32 0.44 \ 2.3 - 32) l \ Fuel tank , H 26.7 -36.1 " / (2.72 - see. 19.7 - 26.6) - 4 Fuel Fuel mm tub. (/b/ liller an Evaporltlun tube 2 L Fuel one: tube v-m mm * Lew mm he: ov n3 =23: :necx mm; s. {q . N-m (kgmlluh) sFeeas