Electronic Compass Zone Map
IF THE IMAGE IS TOO SMALL, click it.

To change the OHC compass zone, hold MODE until ZonE appears in the display; release and tap MODE until the local zone number appears; do not press any button or turn the key OFF until the display returns to normal.

To calibrate the OHC compass, hold MODE until CAL appears; release, and drive slowly in circles in a clear area until the display returns to normal.

For more-detailed instructions, see this:
http://www.mitocorp.com/flash/nvs_comptemp_operations.htm
--------------------------------------------------------------------------------

TSB 96-08-15 Erratic Compass & Map Lamp Operation - Vehicles Built Through 2/1/96
Publication Date: APRIL 8, 1996

LIGHT TRUCK:
1993-96 EXPLORER
1994-96 BRONCO

ISSUE: Map lamp switch and/or overhead compass function operation is irregular, and/or map lamp bulbs may burn out on some vehicles. Installation of revised parts should resolve this issue.

ACTION: Replace the map lamp, switch, compass and wiring harness with a revised Overhead Console Kit (F67Z-78519C42-AA). Refer to Instruction Sheet #7151, included with the kit, for service procedure.

The Overhead Console Kit (F67Z-78519C42-AA) includes the following:
One (1) Map Lamp Assembly
One (1) Map Lamp Button
One (1) Compass
One (1) Wiring Harness
One (1) Modification Label
One (1) Instruction Sheet (I.S. #7151)

PART NUMBER PART NAME
F67Z-78519C42-AA Overhead Console Kit

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION DESCRIPTION TIME
960815A Replace Map Lamp And Console Assembly 0.3 Hr.

See also:

Owner caption July 2003 · Photo 320 of 5000