1987 Ford Bronco Safety Compliance / VIN Data Plate - GVWR, Tire & Axle Codes
Ford Motor Co. door certification/data plate listing GVWR, GAWR, VIN and paint codes
This document is a photograph of the factory Safety Compliance Certification Label (data/spec plate) affixed to a Ford vehicle, stated as manufactured by Ford Motor Co. in U.S.A. The label lists the vehicle's Gross Vehicle Weight Rating (GVWR), front and rear Gross Axle Weight Ratings (GAWR), original tire size (P235/75R15XL), rim size (15X8.0JJ), and cold tire inflation pressures (35 PSI front, 41 PSI rear). It includes the standard certification statement that the vehicle conforms to all applicable Federal Motor Vehicle Safety Standards in effect on the date of manufacture. The Vehicle Identification Number is partially legible and appears to contain 'HLA55697,' with the 'H' model-year character consistent with a 1987 vehicle. A lower data table lists exterior paint color, body, transmission, axle, tape, and DSO/spring codes; readable values include wheelbase 108, TYPE-GVW code U152, trans code K, axle code 19, and tape code 1. The label's own part number, E4TA-1020472-EA, is printed at bottom right. Much of the printing is faded/mottled, so several codes (date of manufacture, exact GVWR, full VIN, paint code) are only partially readable.
Is this accurate? Sign in to help verify it.
Frequently asked questions
- What tire size is listed on this Ford data plate?
- P235/75R15XL tires on 15X8.0JJ rims, front and rear.
- What are the factory cold tire pressures shown on the label?
- 35 PSI cold at the front axle and 41 PSI cold at the rear axle.
- What is the rear GAWR on this label?
- The rear GAWR is legible as 1700 KG; the pound figure is too faded to read.
- What wheelbase and axle code does the label show?
- The bottom code table shows a 108 wheelbase, TYPE-GVW code U152, trans code K, axle code 19, and tape code 1.
- Where was this vehicle manufactured?
- The label states it was manufactured by Ford Motor Co. in U.S.A.
No comments yet.